SOURCE: serpentine belt diagram:
if yours has the 3.8L then here is the diagram. Hope this helps
~ Zach
SOURCE: serpentine belt diagram:
The belt routing diagram is located on the top radiator cross member by the hood latch. You should see it when you open the hood. If it is not there, all Chrysler, Dodge, and Plymouth minivans, from 1993 to at least 1999, used the same 3.3L engine setup, so find someone with one and look for the diagram where I described.
SOURCE: need belt schematic for 2006 toyota corolla
I can get you a diagram on monday but it goes from the alternator to the power steering pump then around the tensioner pulley then around the crank pulley then to the a/c compressor then pull on the tensioner to give you some slack and slip it on the waterpump.I hope that helps.Let me know if you still need the diagram
SOURCE: 2006 ford taurus serpentine diagram
http://www.mvreader.com/multiview/dayco/catalogSearch.php?autoCatalogSearch=1&make=FORD&model=TAURUS&year=2006&year_from=&year_to=&engine=All&l=n
This should Help. Please Rate My Response! Thanks!
SOURCE: procedure to change serpentine belt 2006 toyota tacoma?
Here is your Solution!
You will need to Locate the Belt Tensioner. It has a Large Pulley on a Bracket that Has a Bolt in the Middle and a Smaller Pulley that Goes Under the Belt and Holds Tension on it. You will need to get a Wratchet, Socket, and Cheater Bar. Turn the Bolt On the Top Large Pulley with the Wratchet and Cheater Bar. This will Lower the Smaller Pulley So that you will be Able to Remove the Belt. Please Rate My Response! Thanks! P.S. the link below is for the Belt Routing Diagram.
http://www.mvreader.com/multiview/dayco/catalogSearch.php?autoCatalogSearch=1&make=TOYOTA&model=TACOMA&year=2006&year_from=&year_to=&engine=All&l=n
3,753 views
Usually answered in minutes!
×