Traction control light on ABS light on and hill decent light on

Much more complex! Hill descent controls the accelerator, brakes and traction.

Check your brake fluid level, its prob low.

This is a common problem. The WABCO abs pump has issues with the fluttter valves, there is a repair kit available. Watch out the dealers will try to sell you a whole new unit instead of supplying the repair kit.

i have same probleme with my land rover, this trouble is intermitant wath can i do abs light traction control andhill descent if you have he ansher for me [email protected] thank you

Read my post on landrover enthusiast comes under abs last resort lozzzz

Can't be reset if your ABS system or some component is faulty. check speed sensor on the wheel bearing, is there any rubbing or dull grinding noise coming from the front wheels? could be the entire bearing and speed sensor assembly has gone bad. this would cause all these faults to appear as that sensor triggers all these events in order to slow your vehicle while it downshifts itself and applies breaking to control the vehicle as a part of the stabilization system. The alternative is that the ABS system is not functioning properly and the trac control and hill decent systems are being deactivated as part of the fault. If the system cant apply breaking then the systems are rendered unavailable. the vehicle will stop but not using ABS just regular breaks. Check all ABS break fuses for damage.

These landrovers have a lot of Electrical faults.The first thing i would recomend is to change the switch.Has this is the cheapest option.Hope that works for you.

Just a thought ....... check for uneven tire pressure , or different tire sizes.

abs sensor problem usually connected 2 worn front wheel bearings