SOURCE: chevy 5.7 17 bolt heads tork specs
Cylinder Head Bolt (Preferred Method) All Bolts First Pass in Sequence 22 ft.lb Long Bolt Final Pass in Sequence 75 deg. Medium Bolt Final Pass in Sequence 65 deg Short Bolt Final Pass in Sequence 55 deg. Cylinder Head Bolt (Optional On-Vehicle Strategy) First Pass in Sequence 26 ft.lb Second Pass in Sequence 44 ft.lb Final Pass in Sequence 66 ft.lb
SOURCE: replacing head after repair bent valves need tork specs for head
if interested i can e-mail you a diagram of the torque sequence and torque values just did one this weekend.
SOURCE: how much tork for head bolts on 2.0 mercy tracer
Tighten the cylinder head bolts in the specified sequence — 2.0L SOHC engines
SOURCE: How tight should head tork bolts be on a 91 honda
on the 90-93 accord, tighten the bolts to 29 ft lbs on the first pass, 51 ft lbs on the second, and a final torque of 78 ft lbs, if you have a V-6 29 on the first and 56 on the second and final pass always start from the middle an work your way outward in balance 8,6,2,4,10 upper lower 9,3,1,5, 7 I hope this solves your issue, good luck!
SOURCE: need to replace head gasket ,need tork for head
18 ft/lbs and then three more sequences of 90 degrees each
Testimonial: "very helpful thanks"
301 views
Usually answered in minutes!
×