How do you bleed rear brakes on 94 honda accord lx
Please refer to the link below.
http://corp.advanceautoparts.com/english/youcan/asp/ccr/ccr20011001bb.asp
When the rear wheels are off the vehicle and you look at the back side of the brake plate, ( the round disk that acts as the dust cover if you will on drum brakes) you will see a small nipple with a rubber cover on it. If the rear brakes are disk brakes look on the caliper. Remove the rubber protector placing the proper size wrench (box end) on the nipple, (this can be from 8mm to 10mm in size) loosen the nipple. With the nipple in the full on position have someone pump the brakes a couple of times and hold the brake pedal on, loosen the nipple until fluid squirts out and the brake pedal goes completely to the floor, re-tighten the nipple and have the person in the car again pump brakes until hard and hold. Do this until all the air is out of the lines and the brakes feel hard not spongy.
354 views
Usually answered in minutes!
×