Can you check that injector for pulse . May be bad wiring to pcm
you need what they call a noid light. it just plugs in the wiring harness instead of the injector. so basically just unplug that injector and plug the light in its place ..........then start engine the light should br flashing very fast...these can be purchased cheaply at most auto supply stores. if in canada i know princess auto has them for about 20 bucks for the kit let me know the results i will try and help you solve this neal in whitby
thanks for the update , merry christmas
×
823 views
Usually answered in minutes!
I see you posted a solution but it did not appear in the solution text box?
Ok, I had to disable Pop up blocker. How do I check the pulse at the injector?
turns out it was a bad pcm. It was setting off the #3 fuel inj. code. Went to a local mechanic in Golden, Co and he tried to get me to buy 6 new fuel injectors after he told me that he had checked them and they were going bad. Took it to the dealer (Pro chrysler jeep in Denver, co) and they diagnosed the problem right away and repaired it. I would highly recommend Pro Chrysler Jeep in Denver, Co
×