I have a 2002 f250 brake lights dont work cab brake light works.turn signals hazard etc work except for brake lights

I would check for voltage at the turn signal switch. The brake lights go thru the turn signal switch, except for the high mount light.

You may have a bad signal switch..Your brake lights run through the signal switch..Try hitting the brakes and move the switch around and see if your brake lights come on intermittently..

check turn signal arm might have short or contact problem

I've worked on these the first drove me crazy. its the turn signal switch every thing runs thru these. head lights, turn signal, brakes. except the third brake light. it runs directly from the brake switch. go figuare

well fords are bad about brake light switches going bad... although that will not explain the turn signals. do the hazard lights work?

I suspect a bad multi function switch located in the left hand side of the steering column. This switch controls your high/low beams/wiper delay/windshield washer/turn signals and hazards.

well u have two seprate problems the hazards and turn signals have a flasher that needs replacing if the fuse is good on the fuse box marked signals .and there is a brake light switch under the dash board near the brake pedal it has two wires on it check the wires make sure they are connected if so replace the brake light switch

take the hazard button and tug and wiggle it real hard when pushing the brake pedal, if they start flickering, you will need a turn signal switch replaced.

Sounds like the brake light switch has a problem. Located above brake pedal and activated with the brake pedal arm. Check for power going in and coming out when you apply the brake.

how did you fix the problem I have the same condition