There are three major warning light issues:
For the oil change/oil filter warning: Start with the ignition switch "ON" 1. Push the "ODO/TRIP" button to change the display to blank. 2. Turn the ignition switch off. 3. Turn the ignition switch to "ON" with the trip meter "RESET" button held down. 4. Keep pushing the "RESET" button for longer than 5 seconds after the ignition is turned on. 5. the master warning light comes on, a warning tone sounds and the message disappears.
You can disconnect your battery for 15 minutes or pull the fuse for an ECM or PCM fuse, but the best way is to visit any local repair shop. Most shops will have a universal Check Engine Light Code Reader that can quickly and safely reset check engine light trouble codes. It should take about 30 seconds.
Ask your local service center if they could reset the check engine light with a Check Engine Light Code Reader.
1,578 views
Usually answered in minutes!
×