At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
www.allpar.com/fix/timing-belt-22.html Replacing the timing belts on Chrysler and Dodge 2.2 and 2.5 liter ... Then loosen the bolts on the crankshaft pulley and the water pump pulley so they will be ...
repairpal.com > Questions > Chrysler > Cirrus > 1997 Chrysler Cirrus Jul 4, 2010 - WATER PUMP WANT HOLD WATER LONG AND NOW IS MAKING A ...If you change the water pump,you need to also change the timing belt ...
the 300 could have been doing 55 -a t-bone to the rear axle will rip it apart and a p/u rears try to slid sideways on dry pavement don tak much to make it slide or spin sideways-and a 300 nose is all plastic and their computers are in engine bay cost more to repair so total is insurance choice of action-to determine if the speed is a factor u will need a lawer who deal with accidents one is that they usually have a person or a retired police office who are trained in accident reconstuction and they can request data from black box in other vehicle-but if ur the causing factor [improper turn -improper lane chnge-failed to yield right of way etc...]most lawyers wont take case
try google and ask the question "where is the location of the crankshaft position sensor for 1997 chysler cirrus 2.5 liter engine" or you can go to a parts store and ask for there help, or buy a repair manual it will show you the location.
ignition timing control by pcm.if you try adjusting timing by turning cam shaft you going to damage engine valves and pistons you are going to throw off valve timing when you turn camshaft.
if you never changed the trans fluid yet, don't
the shavings that are worn mixed with the trans fluid must be retained in your trans to keep the trans shifting smoothly
I have seen plenty of people changing there trans fluid for the first time with 50,000 miles then the trans will slip
It sounds like you have got the timing out of zink.
SO if you done it take it off again and aligne all timing marks up on the timing case/head for camshaft etc as it dose seem like your timing is 1 tooth off the mark.
×