At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
4l60e going from 1st to 3rd and dont have overdrive any more
1st gear will go to 4500 rpms and then shift to 3rd if you try to kick it down to 2nd gear it will just free rev and it wont shift into overdrive at all
Re: 4l60e going from 1st to 3rd and dont have overdrive...
You most likely have a broken sunshell inside the transmission. They tend to go out when the transmission is shifted to drive when while still rolling in reverse.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
overdrive is the fourth gear.D1,D2,D3,D4 now drive truck at 80 kmh
cruise at steady speed no fuel pedal movement, downshift from D4 to D3 you should feel RPM raise .. after push brake pedal a little you should see RPM raise 300 to 400 rpm.
shift pattern is 1st gear ,second gear,3rd gear and lock up(torque converter clutch). 4th gear with lock up
hope it helps
I have a 92 Crown Vic first and second works fine reverse works fine when it shifts in the third gear it goes to slipping and overdraft can you help me fix this problem thank you
its most def a purely transmission issue i believe its the solenoids. have it taken to a reputable trans shop near and have them diagnose it with there speciall code reader.
You can put the shifter in 2, 3, or overdrive. It will still start in first and shift up to whatever gear you have selected. Try it, you wont damage anythingl
That sounds like the 1st thing to check is the transmission fluid.Start the car ,warm it up,now shift through all the gears and stop in (N).With the engine running,check the fluid level.Top up if needed.If you do,look for leaks.Hope this helps
You might want to try this if its got a kick down cable unhook it from throutle body and pull it out as far as you can and let it snap back, do this a few of times, sometimes a valve gets hung up inside valve body of trans. and won't let it shift. If that don't help you may have to pull pan to dislodge it if thats the problem. chk. the plug on trans. (Its a 4 wire white plug) with test light with key on to see if there is power down there one will be hot, thats for overdrive, now on top of intake in front throutle body there is a sending unit that looks like a temp. sending unit with a 2 wire plug on it that sends a signial down to that plug when engine gets to temp. to let it shift to overdrive. Maybe this will help, or give you some ideas.
×