Question about 2008 Toyota Highlander

1 Answer

Turn off the mainttenace light after you change the oilhow do you

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 1,861 Answers

This is the reset proceedure for a 2008 Highlander with a key-type ignition:

Turn the key ON, do not start the engine.

Look at the odometer, and verify that it displays "TRIP A". If it is on "ODO" or "Trip B", press the black stick next to the odometer to read "TRIP A".

Turn the key OFF.

Press in, and HOLD the black trip meter reset button, hold it IN.
DO not release it.

Turn the key ON, do not start the engine

Observe the Odometer display. You will see 5 dashes, then 4, then 3, then 2, then 1 dash, and finally, 5 zeros. Then, whatever number that was displayed on "TRIP A" will be re-displayed..

Now release the black trip meter reset stick.

This completes the reset procedure, and it will be back on in 5,000 miles, to remind you of you next oil change

Posted on Jan 04, 2010

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

7 Answers

How do I rest oil change light on a 2001 1500 silveradeo?


Place a piece of black electrical tape over it ,problem solved .you know the oil is good

Oct 10, 2014 | 2001 Chevrolet Silverado 1500

1 Answer

Check engine light solid


Most of the newer vehicles have a senser that will turn the check engine light on, even when it's time to change the oil. After they change it, they reset the check engine light to turn it off. It could be something as simple as that or even an air filter needing to be changed. The dealer can tell you how to reset that light to turn it off. Good luck!

Nov 14, 2013 | 2003 Chevrolet Silverado 1500

2 Answers

How do i reset the oil change light in a 2003 olds alero


turn key on (dont start engine) floor gas pedal 3 times 1,2,3. turn key off, now start engine it should go off, if not try it again.

Aug 03, 2011 | 2003 Oldsmobile Alero

2 Answers

How to reset change oil light on 01 Buick Century


How to Reset the GM Oil Life System
After changing the engine oil, the system must be reset.
1. With the engine off, turn the ignition key to RUN.
2. Fully push and release the accelerator pedal slowly
three times within five seconds.
If the CHANGE OIL SOON light flashes,
the system is resetting.
3. Turn the key to OFF, then start the vehicle.
The oil life will change to 100 percent.
If the CHANGE OIL SOON light comes back on,
the system has not reset. Repeat the procedure.

Dec 07, 2009 | 2001 Buick Century

4 Answers

Oil light stays on


You need to put the key on and push the gas pedal to the floor three times within five second to reset the oil life light.Some g.m.'s have a reset buttom in the fuse panel that needs to be pushed first and some don't.Check the owners manual under change oil for your specific year car.

Oct 21, 2009 | 2003 Chevrolet Impala

3 Answers

Change oil light came on


In your owners manual there is a procedure listed for resetting thr oil change reminder/maintenance light. Some vehicles you turn key on..do not start it.. step on gas pedal all the way to the floor 3 times... then key off. others haver u hold the trip odometer reset button when u turn key on.
It varies from manufacture to manufacturer.

Jul 10, 2009 | 2006 Isuzu Ascender

1 Answer

Want to turn off warning lights on dashboard


Change oil light: remove the driver side fuse cover, there is a reset switch. turn key to on position (engine NOT running), press and release reset button. change oil light will flash. press and HOLD reset button again until you hear chimes and the change oil light goes out. it is now reset.
as for the trac off light, there is a button on the dash which turns the traction control on and off

Jun 02, 2009 | 1999 Pontiac Grand Am GT

1 Answer

Jeep88


try making sure all the grounds are good

Oct 06, 2008 | 1988 Jeep Comanche

5 Answers

Check Oil light stays on even after the oil has been changed


well, it is in the manual under engine oil. turn key to on, dont start. press gas pedel to the floor "slowly" 3 times within 5 seconds. if the change oil light flashes, its resetting. If not, repeat.. this worked for me.

Jul 02, 2008 | 1998 Oldsmobile Intrigue

Not finding what you are looking for?
Cars & Trucks Logo

376 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...