At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: holden VN Commodore 91 automatic not reversing!!!!!
Is it an auto or manual? if its auto the selector band may be too loose or gone completely, check fluid levels and make sure they are good as that can cause it to play up, a service may help free it of clogged and cluttered debree.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Holden barina tk 2007 engine won't start. ? run the fault codes check that the cam shaft is turning ( broken timing belt) check immobiliser for correct operation ...
Holden Barina P1700 OBD-II Diagnostic Powertrain (P) Trouble Code Information Page. Reason for Holden Barina P1700 and find the solution for the code ...
Is it the globe or no power to the socket?.... Either way above your number plate you'll see the lense and it'll have a clip or screws either unclip and remove or unscrew and remove there you'll find the globes
I suggest you go to the VZ commodore forum for that and hopefully one of the guys there will help you out if you ask politely.
Here is the link/...........
Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.
To replace crank angle sensor .
1.you will need to remove drive belt
2.remove harmonic balancer to get to crank angle sensor
3.remove crank angle sensor
then do these steps in reverse to reassembly
Is it an automatic? if so, try putting in more transmission fluid. You might need to get your transmission fluid flushed. If that doesn't work, then you might need to get your gears checked by a mechanic. If it is a manual, try having the same thing done.
×