1.) To begin, if your radio is
displays LOC, then proceed to step 2. If your radio says INOP, then
turn your ignition to the RUN position, and turn the radio ON. You must
leave it like this for a minimum of 1 hour (not 59 minutes) to
clear the INOP message. I would wait 1 1/2 hours just in case doing it
too early causes the timer to start over.
2.) Turn your ignition to RUN (if not already), and your radio to OFF.
Press and hold preset buttons 2 and 3 for around 5-10 seconds to obtain
a scrambled version of your radio's original factory set code.
3.) Call 800-537-5140 and ignore whatever you are promted to do (something about different dealer brands Chevy, Pontiac,saturn.), and type the number 202108 into your phone and then press the # button.
4.) Input your radio's 4 digit code into your phone when prompted, then
press the * button (NOT pound symbol like above step) and be ready with
a pen and paper to write down the unscrambled code. Keep this code
somewhere you WILL NOT lose it. I wrote mine in the notes section of
the owners manual.
5.) Once you have the code written down, press and hold 5 and 6 on your radio's preset buttons for 5-10 seconds.
6.) Then press the seek down button once to start the entry process.
7.) Using the following key, repeatedly press the buttons to set your code:
seek down = first digit
seek up = second digit
tune down = third digit
tune up = fourth digit
NOTE: I just checked a picture of the stereo out and discovered the
buttons have arrows facing left and right and not up and down. For the
purposes of this process, left represents down, and right represents up.
8.) Once you have the code entered, press AM/FM to set it.
Try this
281 views
Usually answered in minutes!
×