I need to know how to install a serpentine belt on a 4.6 ford roush mustang (2006) with a supercharger

On the WEB:
images for serpentine belt diagram for 2006 mustang gt

Diagrams are available from Gates, Dayco, and Continental (Contitech) for most serpentine belts. Replacing the belts shouldn't be undertaken unless you have the proper fitment tools and are familiar with alignment procedures. Serpentine belts are typically replaced every 60K miles and Gates Racing Blue are the finest on today's market, lasting bit longer under demanding driving conditions. Replace any accessory belts, the crankshaft front oil seal and water pump at the same time... you will thank me later!

Here yeah go 1989 Mustang serpentine belt

Fox Mustang Alternator Easy Alternator Upgrade 5 0 Mustangs Super Fords...


hopefully that helps

Have a look at this page here.
Can you help with this Ford 2006 Mustang question posted on FixYa

Hope this helps ya.. Cobra... :-)


Item Part Number Description 1 10344 Generator pulley 2 8620 Drive belt 3 8A528 Water pump pulley 4 3D673 Power steering pump pulley 5 63126 Crankshaft vibration damper 6 2E884 A/C clutch pulley 7 6B209 Drive belt tensioner 8 19A216 Belt idler pulley 9 19A216 Belt idler pulley

what is your question? what dont you know how to do? do you have tools? belt diagram available from parts stores. you have a tensioner, so you need to turn it to release tension. other than that i need more info.

I can't find that Ford had a 3.6L in 2000 for Mustang.
Here's a link to a 3.8L
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7002

Here's a 4.6L diagram
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S8016

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK on the following LINK. It has the Belt Diagrams you will need.

If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/1990/make/ford/model/mustang/1990_ford_mustang_drive_belt_routing_diagram.htm

relax belt tension regulator, install belt. then
tighten tension regulator.

http://www.mvreader.com/multiview/dayco/catalogSearch.php?autoCatalogSearch=1&make=FORD&model=MUSTANG&year=1986&year_from=&year_to=&engine=BJ3&l=n

This should Help. Please Rate My Response! Thanks!