2005 Dodge Neon Logo

Related Topics:

Posted on Jan 23, 2010
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Engine code p 3000 p3001 on a 2005 dodge sx 2.0

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

  • Master 324 Answers
  • Posted on Jan 23, 2010
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Joined: Sep 02, 2007
Answers
324
Questions
0
Helped
147619
Points
1026

If the codes are p3000 and p3001 then I am at a loss, I can't find these codes anywhere.
However if the codes are p0300 and p0301 then here they are

if that is the problem it sounds like it may be time for a tune-up, plugs n wires. hope this helps you

  • satan955 Dec 14, 2010

    Usually all it is is oil in the plug holes. If that's the case replace valve cover gasket and seals.

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2004 Dodge SX 2.0 automatique, when in neutral or park engine revs high and comes back down only to go back up again - between 1000 and 3000 RPM, resopnds well to the gas pedal but does not come back to a...

Check for vacuum leaks. With the rpm difference that large it should be pretty easy to hear the vacuum leak hissing with the engine running.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

0helpful
1answer

Location of dodge sx 2.0 Data link connector (DLC)

If you are talking about the OBDII connector for a scanner or code reader, and the Dodge is a 1996 or newer, it should be under the steering column.
0helpful
1answer

2004 Dodge sx 2.0 . Wheres the fuel filter ?

So you think its the fuel filter at fault? Is the engine light ON? and what are the trouble codes?
0helpful
1answer

Dodge sx wont rev past 4000

might be worth checking the air intake for any blockage etc before getting into more invoved work
0helpful
2answers

I have a 02 dodge grand caravan sport with 0351,0352,0700 codes...car runs good then shakes and even stalls at times,but not all the time...i have replaced ignition coil,wires,plugs,and catalytic...

po700 code just means you have codes
P0351-IGNITION COIL #1 PRIMARY CIRCUIT

WHEN MONITORED
With battery voltage greater than 8 volts during engine cranking or greater than 13 volts with engine running. Engine RPM less than 3000. No coil in dwell during test.

SET CONDITION
Peak current is not achieved with battery based dwell plus 1.5 msec of diagnostic offset. It takes less than 3 seconds during cranking or up to 6 seconds while running to set.

POSSIBLE CAUSES
- Ignition coil
- Intermittent condition
- ASD relay output circuit
- Ignition coil driver circuit open
- Ignition coil driver circuit shorted to ground
- PCM

P0352-IGNITION COIL #2 PRIMARY CIRCUIT

TEST NOTE
This symptom is diagnosed using the test P0351-IGNITION COIL #1 PRIMARY CIRCUIT.

WHEN MONITORED
With battery voltage greater than 8 volts during engine cranking or greater than 13 volts with engine running. Engine RPM less than 3000. No coil in dwell during test.

SET CONDITION
Peak current is not achieved with battery based dwell plus 1.5 msec of diagnostic offset. It takes less than 3 seconds during cranking or up to 6 seconds while running to set.

POSSIBLE CAUSES
- Ignition coil
- Intermittent condition
- ASD relay output circuit
- Ignition coil driver circuit open
- Ignition coil driver circuit shorted to ground
- PCM
var classElements = new Array(); var node = document; var tag = 'a'; var els = node.getElementsByTagName(tag); var elsLen = els.length; var pattern = new RegExp("(^'\\s)specs_note(\\s'$)"); for (i = 0, j = 0; i
var classElements = new Array(); var node = document; var tag = 'a'; var els = node.getElementsByTagName(tag); var elsLen = els.length; var pattern = new RegExp("(^'\\s)specs_note(\\s'$)"); for (i = 0, j = 0; i
5helpful
1answer

2004 Dodge sx 2.0 runs great but check engine light is on.?

I take it the light stays on? You might want to check your air filter, might be stuffed. You can reset the Check engine light by disconnecting the battery while the ignition is in the 'on' position, either negative or positive( I generally go with the positive, feel better about it for some reason) leave disconnected for about a minute, during this time I turn the ignition to 'off'. Reconnect the battery, if the light comes back on, you might want to get it scanned with an OBD and see what error codes it gives you, could be an O2 sensor or anything.
1helpful
1answer

Where is located the camshaft sensor on a dodge sx 2.0 2003?

camshaft sensor located on end of cylinder head near battery..remove battery..4 bolts and wire connector..clean mounting surface and install new sensor
1helpful
1answer

My sx 2.0 gave me an error code of p 0171. What does this mean?

Hi there...P0171 code is system too lean bank 1. this could be caused by an oxygen sensor gone bad.
0helpful
1answer

The digital odometer shows some wrenches and -3000

The wrench is -3000 miles pass due oil change . or no one reset the code.
0helpful
2answers

My cars engine turns over, but it won't start.

You'll need to determine if it's getting fuel, & spark, if you know how to check it. Also try cycling key on, off, on, off, on, and leave on and count flashes from check engine light. Will always be 2 digit number. For example flash, short pause, flash would be code 11, flash,flash,flash, pause, flash flash, would be 32. After every 2 number set, it will pause a little longer then start again if more codes are present. Try this and write them down & get back to us. These are trouble codes to try & tell you whats wrong.
Not finding what you are looking for?

1,565 views

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...