In the recent ice and bad weather, i tried to unlock the door of my 97, 406 Peugeot the remote didnt work so i opened the car on the driver side but the lock just kept spinning , now the remote wont work and i cant lock or unlock the passenger side door or the driver side door with the key, and if after the 1000's time trying it does lock the boot doesnt! and then i cant open the doors again please help if you can thank you smiffy34.
SOURCE: Peugeot 406 estate, locking problem
HI,THIS IS VERY COMMOM ON ALL PUGS AND CITRONS,TRY GOOD OLD WD40 SPRAYING ON THE KEY AND KEEP WORKING KEY IN/OUT OF LOCK,IT WILL START TO TURN LOCK WHEN ALL THE WORKS ARE CLEAN,THANKS.
SOURCE: Peugeot 406 SV rear seat removal
take it you have done it------- two brackets at front of seat
SOURCE: groaning noise on my peugeot 306 passenger door/ cl unlock n locking thing
open the door pull the rubber boot back that houses the wiring loom you will find that there are a number of wires broken if doable solder them back to gether and insulation tap them up, you should find this solves your problem.
your noise should and your windows should work if there are to many wires brocken you can get a new loom from the dealer
good luck
this is a very common problem i do 2 ore 3 of these a day
SOURCE: peugeot 406 hdi
very hard to diagnose these cars go to dealer and get checked it is the only way to fix these kind of issues
SOURCE: 307 central locking fault
If you have replaced the battery and the ecu wasn't in sleep mode, then you'll lose the synchronisation between immobiliser and fob. go to peugeot dealer or call out a car locksmith who then can reprogram your fob with car ecu. I have read the method in internet but not sure what the steps were. you can google it may be you'll find it.
592 views
Usually answered in minutes!
×