At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
16 spark plugs
Now, let's review the procedures to replace the spark plugs on the 2004-2005 5.7L HEMI engine ... eight of the 16 spark plugs are located under an ignition coil, those coils will have to be removed.
Mar 25, 2019
This one's the fusebox in the interior of the car; usually below the steering wheel in a panel with a thumbscrew that you just give a quarter-turn, then catch it as it opens; inside are some fuses, which tend to be obvious when they are blown. There's a little legend that tends to be well-lit too, indicating which fuses were for the ligher/'auxillary 12v power' socket. Don't let a failed lighter bust on you; a flaming car is much more expensive than tossing/replacing the bad part or plugging something else in.
Google search Fuse diagram for 2004 Dodge Durango Limited 5.7l/ Hemi look around if no answer look on the fuse box cover. Diagram usually located inside.
well you need to unbolt the arm rest first. push the driver seat and passenger seat all the way forward and there is a screw in the side panel of the armrest on both sides. open the armrest and there are screws under the small cover. removed cup holder just by pulling up on it and there is 3 screws under that. pull back on the entire armrest and get it out of the way. now you can see 2 screws at the end of the black panel for your shifter-remove. also remove ashtray and there is a screw behind that. now you should be able to pull out the panel that holds the lighter.
×