Where do you get a copy of the Wiring Diagram for 1999 Ford Ranger 3.0 from starter to Battery.. Truck will start when engine is cold, but it won't when its warm. Help what could it be? What things should I check I already put in 3 different starters,
If u can gain access to the ignition switch wiring use a testlight and probe each wire while turning the ignition at start position.one of these wires shld have power during starting position and release it again to confirm.this wire goes directly to the trasmission multi lever position swicht (mlp).this MLP is mounted just outside the transmission shifting lever ganged together.Trace the corresponding return wire using the testlight. You may need someone to help you do the job.The return wire usually go to a relay on your fuse box on the engine compartment.Then from relay to the starter.
2,950 views
Usually answered in minutes!
This is a auto transmission. Also when you go to start it when its warm sometimes it acts like it will start and sometimes everything comes on but it won't do nothing sometimes. Its seems to be getting worse taken alot longer to cool off before it will start.
i presumed that when its warm no cranking activity since you tried 3 diff starters already.is it a manual or auto transmission?
×