Where is the cam postion sensor located on a 2004 Dodge Sprinter 2500 5cyl ?

Is this a deisel motor? If so, it will not have a crankshaft sensor

pass. side. just below front valve cover

The first one sensor 1 is located just ahead of the converter. The second one sensor 2 (the one you are looking for) is located right after the converter.

before you change anything else, Unhook the battery and wait ten minutes,,hook it back up Neg terminal first ,, maybe that will reset the code ,,

There will be more than one oxygen sensor. They are located in the exhause manifold, and just after the catalytic converter. Changing them is very easy. You will need an oxygen sensor socket (available at part stores for around $10). Then the sensors just unscrew and screw in.

removing 2006 dodge sprinter brake switch

search on internet, mercedes om 612 engine diagram

Should be front & rear o2 sensor. Replace them.

p2238 is the oxygen sensor bank 1 sensor #1 which is up stream in the exhaust manifold. My manual is showing that the current control crcuit is low. p2245 is the same sensor, showing that voltage circuit is low. Replacing this sensor should fix the problem.

Go to nearest garage and do diagnosis test and fault erase.