I need a diagram showing how to put the belts on a 1997 bonneville ssei

Hello mchaffin98,

Below is an image of the belt routing.



I hope this helps.

Regards,

Jerry

This should Help

Go to this link and you will find the diagram your lookiing for. Count the belt contact points(pully) and notice where they are. http://www.paulstravelpictures.com/GM-Pontiac-Grand-Prix-Serpentine-Belt-Replacement-Guide/GM-3800-II-Serpentine-Belt-Replacement-Guide-003.html

Serpentine drive belt routing-GM “C and H” Bodies 3.8L (VIN 1) engine

Here ya go!

Here's a diagram from Dayco for 3.8L engine, multiple accessories:

1997 PONTIAC BONNEVILLE - V6 3.8L 231ci GAS FI N K
Belt Routing Diagram - Multiple Accessory




1997 PONTIAC BONNEVILLE - V6 3.8L 231ci GAS FI S 1
Belt Routing Diagram - Idler, Tens. & SC





1997 PONTIAC BONNEVILLE - V6 3.8L 231ci GAS FI S 1
Belt Routing Diagram - Multiple Accessory




Hope help with this (remember rated this help).

8th digit of your vin# needed. Is it an "L", "C" or "K" ?

This is the one for the supercharger.

these motors have two carrier pulleys and oone tensioner. lookinjg at the motor from the rightside of car the belt goes as follaws: crank pully to super charger from the left. the right side goes up to the lower carrier which will have the flat of the belt riding on it. from there the belt routes to the upper carrier
[ loop it over so the grooves ride
] and then under the tensioner any questions contact [email protected]

If you can get me the factory code I can get you the unlock code