Have you performed the system relearn after you replaced these parts?? This must be done after the TCCM, transfer case motor, or switch is replaced. DIsconnect the battery for at least 2 and a half minutes. Reconnect the battery. Cycle the ignition key 5 times to the run position, then to the off position. Allow 1-2 seconds after you turn it ON, before you turn it OFF during the 5 cycles. After this start the vehicle, and the system is now reset. It may or may not fix your problem, but it needs to be done after any 4x4 part is replaced.
447 views
Usually answered in minutes!
×