Broken serpentine belt on 1999 Taurus SHO

Robert, Serpentine belt diagram. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How To Install Replace Serpentine Belt Ford Taurus 3 0L V6 1AAuto com
2003 Ford Taurus V6 3 0L Serpentine Belt Diagrams serpentinebelthq com
2003 Ford Taurus Belt Diagram Am Having Problem Getting My

Jeff, Check the attached links,instruction and guides, diagram for a serpentine belt, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Amps Belt routing Installation and system start up for 6 7L Cummins
Serpentine Belt Routing
Drive belt routing
2011 dodge 6 7 cummins serpentine belt diagram Google Search

The 8th digit of your car's VIN (vehicle identification number) tells you the engine
type for your car - your choices for Ford Taurus are U (3.0L), and S (3.0L).
I've included the Ford SHO engine too.




Serpentine belt for 3.0L (Vin U) Ford Taurus


Serpentine belt for 3.0L (Vin S) Ford Taurus


Serpentine Belt for Ford 3.4L SHO engine


Water Pump belt for Ford 3.4L SHO engine

REMOVAL AND INSTALLATION

1. Attach a 15mm socket or wrench to the bolt attaching the tensioner pulley.
2. On all 3.0L (OHV) engines, rotate the drive belt tensioner clockwise to relieve belt tension and slide the belt off the pulleys.
3. On 3.0L (DOHC) engines, rotate the tensioner counterclockwise to relieve belt tension and slide the belt off the pulleys.
   

To install:

1. Install the drive belt on all the pulleys except the tensioner pulley.
2. Rotate the belt tensioner as outlined in the removal procedure to relieve belt tension and install the belt onto the tensioner pulley. Make sure the V-grooves make proper contact with the pulleys. Make sure the spring keeper releases or improper belt tension will occur.

Tip: you may want to get (free) a serpentine belt installation tool kit to help with this job.
Both Advance Auto Parts and AutoZone wisely have loan-a-tool programs that permit you
to borrow (for a deposit) their serpentine belt installation kits - which allow their
handy customers to use their auto parts rather than towing it to a garage.

1997 FORD MUSTANG - V8 4.6L 281ci GAS FI N V
Belt Routing Diagram Multiple Accessory





1997 FORD MUSTANG - V8 4.6L 281ci GAS FI N X
Belt Routing Diagram Multiple Accessory



Hope this help (remember rated and comment this).

Fig. Serpentine accessory drive belt routing-3.0L (VIN U) engine


Fig. Serpentine accessory drive belt routing-3.0L (VIN S) engine


Fig. Serpentine accessory drive belt routing-Ford 3.0L (VIN U) engines


Fig. Serpentine accessory drive belt routing-Ford 3.0L (VIN S) engine


Fig. Serpentine accessory drive belt routing-Ford 3.4L SHO engine


Fig. Water pump drive belt routing-Ford 3.4L SHO engine
i wasnt sure what engine you had hope this helps good luck

http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7021

Here are two links to take you to the serpentine belt diagrams... choose your engine type.

V6-24 valve engine
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S5021
V6--12 valve engine
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7021

This information can be found at www.serpentinebeltdiagram.com
They have all the belt routing info for any vehicle with a serpentine belt.
Hope this helps....

http://wiki.answers.com/Q/How_do_you_know_the_serpentine_belt_routing_for_your_car

The belt routing diagram is located on the top radiator cross member by the hood latch. You should see it when you open the hood. If it is not there, all Chrysler, Dodge, and Plymouth minivans, from 1993 to at least 1999, used the same 3.3L engine setup, so find someone with one and look for the diagram where I described.