At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check for a fuse box underneath the dashboard in the drivers side. Some times there is a plastic lever that needs to be pulled down in order for the fuse panel to swing down. Check your car manaul to see where the dasboard light fuse is located, some times the fuse can be located in the engine compartment where you will find a rather big black plastic box with relays and other fuses. Another fuse box location is found on the passenger side underneath the dashboard or kick panel, better to check the owners manual so you don't have to look into all 3 locations.
When you do find the right fuse block, look for a fuse that is labled Insturment Lights or Cluster Panel, that usually indicates the dashboard light fuse. The fuse used in most dashboard lights is around the 15 to 20 Amp range.
When the dashboard lights in your vehicle malfunction or cease to operate, the resulting effects can range from being a mere annoyance to posing a safety hazard. Locating the problem and finding a remedy is essential. To fix dashboard lights that won't light, follow these suggestions
Evaluate the problem methodically. Begin the process by trying the simplest of solutions first. Most vehicles have a dashboard lights control switch that will dim the dashboard lights, as well as turn them off. Check the control switch, which should be located on the console near the steering column, make sure its in the correct position to have the lights on.
Check the dashboard light fuse. A blown fuse can disable the vehicle's dashboard light. The fuse box may be under the hood, or on the floor, near the brake pedal, or there may be 2 fuse boxes in both places. Refer to the diagram on the fuse box cover to locate the correct fuse. Replace the dashboard light fuse if necessary.
If all of the above don't fix it, then replace your light switch.
Need more clarification on dashboard light problem. Could it be a blown fuse? I would check the fuse panel before disassembling the dashboard. That would be a pain in the ***** if all it was was a fuse problem. Just sayin'. :)
If your dashboard lights are not lighting up, chances are the fuse has blown up. And you may need to change it. Typically, the fuses are located under the dash, in the glove compartment, or under the hood.
Your NP200's fuse box that has the fuse for dashboard lights is located under the dashboard on the driver's side. Use a flashlight to locate it. Once found, remove the cover and use the provided map on the cover to find the dashboard light fuse. For more help, please refer to the user manual that came with the car.
I would recommend checking the fuses for the dashboard lights. If no fuses are burned, there could be a possibility of the bulbs in the dash being burned. In any case, start by looking in the manual for fuses relating to dashboard/gauge cluster lights. Once you find out what fuse it should be go from there.
×