My brake lights, running lights, and instrument cluster lights went out on my 1997 Ford Windstar. When I test with a tester light, the fuses on the fuse block under the drivers side dash a fourth of them have no power with the ignition on or off. The major fuses under the hood are all good. The bulbs are good, what am I missing?
SOURCE: need to reprogram 2000 windstar instrument cluster to old keys
unfortunately , no you can not.
Ford is good like this... they make their own tools for any number of FORD ONLY items , such as fasteners and etc. so that you can not work on them without buying their tools first.
The security features are definitely something you will need to contact the dealer about.
Wish I had a more positive answer for you!
SOURCE: brake and turn signal lights stopped working on my 1996 Ford E150
You might have cut a wire or it could have broken or disconnected. Try tracing the wiring where you hooked up the trailer you may find one broken or disconnected.
SOURCE: 1996 Pontiac Grand AM Instrument Cluster same as that of 1997?
it is not the same.
if you are changing the cluster because some functions are intermittent,check the solders on the pc board...
SOURCE: fuse blows for instrument cluster on 97 toyota camry
U HAVE A SHORTED POWER WINDOW MOTOR CIRCUIT, START BY DISCONNECTING THE WIRING TO THE DRIVERS DOOR AND SEE IF IT GOES AWAY.
147 views
Usually answered in minutes!
×