1992 Chevrolet S-10 Logo
Posted on Mar 13, 2010
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Hello, i broke the emergency light switch off on my 1996 chevy s10 and now the emergency lights will not turn off. how do i fix the switch?

1 Answer

Randy Light

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

New Friend:

An expert that has 1 follower.

  • Expert 84 Answers
  • Posted on Mar 13, 2010
 Randy Light
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

New Friend:

An expert that has 1 follower.

Joined: Feb 11, 2010
Answers
84
Questions
1
Helped
23987
Points
226

This is not a real easy task. You have to remove the steering wheel and Airbag (if you have one). The steering wheel lock ring (locks steering wheel when key is removed) Then there are three screws that hold the turn/emg flasher indicator switch in place. You will also have to lower the steering column down from the dash to get the wires and plug though. Set aside a few hours if this is your first time. Good Luck

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

1997 5.7l V8 ext. cab. How can I replace ignition switch?

You will need to take the steering column apart to replace the switches. You will need specific tools to do it also.
Check this link:
1997 Chevy truck ignition switch replacement
1helpful
3answers

1996 chevy 1500 truck when i turn left turn signal on back up lights come on and when i turn the right turn signal on the emergency blinkers come on. The front blinkers work correct.

Hello: There are two things that could be dausing this: One is the board that holds the bulbs in the tail light assembly, it could be shorted internally. The other thing is on the rear right fender on the inside there is a electrical distribution box for the rear lights it also could be internally shorted, also the connectors to that box could be corroded and causing your problem. Hope this helps.
0helpful
1answer

1998 Chevy S10 Pickup - Emergency Brake is stuck. How do I repair?

Your emergency break has a cable. I would say the cable is broke, in the lock position. I don't know the specifics, but the cable is probably broke.
0helpful
1answer

1996 Chevy S10 ZR2 No brake lights, CHMSL works, new bulbs, new brake light switch, good ground, hazzards work, signals work runners work, any suggestions?

check voltage from brake switch to signal light switch, signal goes from brake pedal to signal switch then to taillights, i suspect the problem is in that area
8helpful
2answers

No signal lights at all and no emergency flashers

you need to check the "combination turn signal/hazard flasher/daytime running lights module"
it is located in the junction block,the junction block is adjacent to and left of the steering column,you need to remove the lower dash panel below the steering column,then remove the steel knee brace.
0helpful
2answers

Brake light on dash

It is either your hand brakes have gone bad or the brake system has gone faulty.

have a thorough check at these.

Cheers

rate this best
1helpful
1answer

1996 s10 LS abs light in dash

take it to auto zone or advance or pep boys have them scan it. They will do it for free. let me know what happens...gl...DC
4helpful
2answers

No tail lights

Try checking the headlight switch it may have broken contacts in it. Easy fix go to a salvage yard find same make and model truck, swap headlight switches.
20helpful
5answers

Chevy s10 brake lights

If the problem is that the brake lights will not turn off, the problem is most likely the CHMSL relay. An easy check is to take the cover off the fuse block mounted on the driver's side fender well and swap the fog lamp relay with the CHMSL relay. If that fixes it, just get a new relay for the fog lamps and you're good to go. Note, my 2002 s10 does not have fog lamps, but it still had the relay populated in the fuse block.
Not finding what you are looking for?

328 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...