Well first disconnect the positive side of the battery. Then I recommend grounding the positive battery cable to the frame or negative side of the battery. (This will insure you have all possible stored voltage removed from your system). Your 95 model has two types of steering wheels and air bags. Model 1 there are four holes in the back of the steering wheel. You simply push a small punch or ice pick in the center to release the airbag from the steering wheel. If you have the later model 1995, there is a slot and you have to push a wire clip that holds the bag to the steering wheel. Once you get the air bag off the wheel, it just unplugs and you remove the steering wheel using a puller. All GM air bag circuits are yellow. They won't deploy without power. Good luck, I hope this helps.
?€¢
The steering wheel module stage 1 or stage 2 deployment loop resistance is greater than 4.8 ohms for 500 milliseconds.
has to do with
445 views
Usually answered in minutes!
×