REMOVAL AND INSTALLATION
Trim Panel —Front Door, Expedition
Removal
Remove the sail panel.
Lift upward and then outward to remove the front door trim panel (23943).
Installation
Install the window regulator switchplate.
Install the sail panel.
SOURCE: My power window came off track
There are 2 screws just above the door handle you need to remove. Remove the plastic trim around door handle. Then starting at bottom of door panel pull out to disengage the push pin clips and work your way up both sides of panel. Then lift up on door panel to disengage the weatherstip on top of panel.
SOURCE: how to get driver door panel off 1998 ford expitdetion
It's usually the window winder that presents the problem . Remove all visable retaining screws ie; Grab handle , Internal door opening lever , Button on top of panel (if applicable ) etc . The majority panel are a pop snap on type . Remove the winder lever withthe aid of a shoe lace or thin piece of cloth material, The winder is retained by a horse-shoe shaped spring clip. .... Pull the shoe-lace/ material in the opposite direction of the winder retainer clip and it will easily come off, but it is a spring clip and may fly off so be careful. Good luck
SOURCE: need routing diagram for 1998 ford expedition
Check this...
Other details can find in 1998_ford_expedition_drive_belt_routing_diagram
Hope helps (remember comment and rated this).
SOURCE: 1998 Ford Expedition "door ajar"
Hi!!
On Ford vehicles from 98 to 02, the light Door Switch on the Driver's or Passenger side is a common problem. One day you come home from work and in the morning, your vehicle's battery is drained, First thing to do is to take the Dome Light Fuse out to avoid a NO START situation, Second is to check your Door Switches starting with the Driver's Side.
Good Luck!! A HELPFUL - 4 THUMBS - rating for this solution would be greatly appreciated. Thank you for using FixYa.
1,514 views
Usually answered in minutes!
×