Cars & Trucks Logo

Related Topics:

Anonymous Posted on Mar 18, 2010

BLEEDING BRAKE ORDER CHEVY EQUINOX 2005 - 2006 Chevrolet Equinox

  • Anonymous Mar 18, 2010

    BRAKES FELL ALOT BETTER, BUT THE ABS LIGHT AND TRACTION CONTROL LIGHT ARE STILL ON, DO I NEED TO RESET?

  • Anonymous Mar 18, 2010

    HOW TO RESET THE ABS AND TRACTION CONTROL LIGHT

×

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.

  • Master 1,608 Answers
  • Posted on Mar 18, 2010
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.

Joined: Jun 25, 2009
Answers
1608
Questions
0
Helped
748894
Points
5514

Always start with the farthest bleeder from the master cylinder.That would be the right rear first,then left rear,then right front,then left front.I will usually open the farthest one out and let it gravity bleed first.Depending on what the repair was.Did you just replace a wheel cylinder or did a brake line rust?if the problem is only in the rear you only have to bleed the rear.Again farthest away first.Hope this helps.Let me know how you come out or if you have anymore questions.Good luck.

  • Anonymous Mar 18, 2010

    The brake pads or shoes do not make the abs or traction lights go on.You have to get the codes from the brake module to find out what is causing the lights to go on.You did not specify that the lights were on.Get the codes and I`ll help you find the problem.

  • Laurie viglietta
    Laurie viglietta Oct 19, 2013

    How do I get the code

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
0helpful
1answer

Bleeding brakes 2005 equinox

Lots of air in system. Close valve, helper depresses peddle, open and close valve to extract air - fluid without lifting peddle. With valve closed lift and depress peddle again. Repeat process many times until clear and steady while watching master cyl fluid level never gets lower than 1/3. Having the fluid extraction hose in a clear container immersed in fluid will aid in seeing air bubbles.
1helpful
1answer

I have a 2005 Chevy Equinox. When I press on the brake, the odometer (and other lights) dim. Let off the brake, lights return to normal. What is it?

make sure the vehicle is charging. that will cause the lights to dim. use a multimeter set to dc volts to test. or could be loose battery posts. does car start ok?
0helpful
1answer

Brake system lights keep coming on. the brakes were resently changed

probably air in brake line , if you had work done by someone they should have bleed the lines
return and ask it be done
0helpful
2answers

On my 06 chevy equinox the third brake light is loose can it be fixed without buying a new light?

3rd brake lights are usually just held with 1 or 2 screws.if the clip or plastic it screws into is stripped,you can usually find a used part pretty cheap.it may just need to be screwed down.the metal clips may be found at a hardware store.
2helpful
1answer

Where is the coolant bleed screw in the 05 Chevy Equinox LT? This is killing me....bled air out of some hose that sprayed a greenish oily substance, but i haven't seen where the engine coolant bleeds...

the 05 uses the red coolant dexcool which is not compatible with green [antifreeze]if u topped off the nox with green the mixture jells causing all sorts of cooling problems need to flush out system as to bleed screw their isnt one
3helpful
2answers

Where is the transmission Fill plug on a 2005 chevy equinox?

There is no fill plug on transmission pans, you have to fill them from the
dipstick tube in the engine bay. Get a long funnel that will fit into the
dipstick tube hole, and then fill it that way. Make sure you turn the
vehicle on while filling it, and put it through all the gears, with your foot
on the brake. This will make sure your torque convertor is being properly
filled, along with the trans. Good luck.
0helpful
1answer

Emergency brake light is on all the time without the brake beign on what do I need to do? on my 2005 chevy equinox

check your fluid level on the master brake cylinder resevoir(RH side to the rear of the engine compartment mounted to a large circular metal). When the fluid is low, this light will remain on. If the levels are fine, might be a possible damaged Ebrake switch or air in the system. Hopefully this helps
Not finding what you are looking for?

2,207 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...