97 jeep wrangler getting spark not fuel. I replaced the coil, fuel relay, ignition module, crank sensor
Sounds good ninemil, I would also check for any bent or disconnected fuel lines that would restrict the fuel flow as well. I do not know if this has a fuel pump assembly but you should be able to hear it actuate on when the key is in the "on" position. How did it act before you shut it off? Was it harder to start? Make sure you buy a high quality pump (Carter) many of those cheaper brands will fail trust me.
Testimonial: "It actually had no spark or fuel . It was the computer. Thanks for answering"
If you are not getting any fuel and you have replaced the fuel relay I would check into replacing the fuel pump and the fuel filter, there isn't much else in between the injectors and the tank that will cause a no fuel problem except for the fuel pressure regulator. You can test that with a mighty vac, if it hold vacuum then its good.
457 views
Usually answered in minutes!
×