Belt diagram 1998 grand cherokee

need timing belt diagram for a 1998 Jeep Cherokee Classic

1998 Jeep Grand Cherokee 5.2 Liter And 5.9 Liter Serpentine Belt Routing try this link http://autorepair.about.com/library/pictures/illustrations/bl750a-lib.htm

1997 JEEP GRAND CHEROKEE - V8 5.2L 318ci GAS FI N Y
Usually the label diagram is underhood, over radiator/grille...





If you need more details about youe Jeep ZJ Grand Cherokee, can check this documents about Repair Manual: Grand Cherokee 1993-1998 FSM

To get out, it's easy and doesn't require a prybar.

• Get a 14mm or 9/16" socket and a long handled ratchet or breaker bar.
• Get the belt around all the pulleys except the A/C compressor or Alternator.
• The tensioner pulley is near the Alternator toward the center of the engine. It's on a spring loaded arm. Get your socket on the center nut of this pulley.
• Slowly pull the ratchet toward the center of the engine. The pulley will pivot on the arm allowing you to get the belt on the final pulley.
  
• Slowly release the tension.
  
• You're done

Hope helps (remember to rate this answer).

give me an email ill send u a pic of it

The easiest way to change a serpentine belt is to go and buy a serpentine belt tool (Around $15-$20 at the auto parts store.) It's a long, flat wrench with bits that will fit most belt tensioners. The idea is to move the belt tensioner down, to allow the belt to relax so you can pull it off.
Once you have the belt off, follow the serpentine belt installation diagram on a sticker, located under the hood. Then, while pushing down on the belt tensioner, slip the belt on to the last pully and then slowly bring the tensioner back to tension. Double-check your belt routing with the belt diagram before starting your Grand Cherokee.

I hope this helps! :)

the diagram should be on a sticker on the radiator shroud cover or, the hood latch cover.

Google; "1998 jeep grand cherokee vacuum hose diagram"...
Click on first choice...
Choose, top row from left to right, # 4...
Then click on diagram in the upper left corner of page; "See full image".


FixYaWIZ...............saailer




I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867

Check several documents about this:

1. 1998 | JEEP | GRAND CHEROKEE Go to
- User: greatfalls / Pass: publiclibrary
- Select Auto Repair Reference Center>> 1998>> Jeep>> Grand Cherokee>> Model
- Repair Procedures
- Chassis Electrical>> Circuit Protection

2. Engine Fuses

3. ZJ-Secc-8W-Wiring-Diagrams

Good luck!!!

Check on upper rad shroud or under hood for routing diagram. Depending on what engine, procedure may vary a little. I wouldn't panic on replacing anything other than belt unless you noticed something noisy under hood in last while.
If not up to it, a mechanic should be able to do it for you in a few minutes usually, but won't hurt to ask before, just in case.

This link will take you to a picture of the diagram. If the link doesn't work contact me and I can email you the picture directly.

http://autorepair.about.com/library/illustrations/bl506a-lib.htm