Question about 2000 Honda Civic

1 Answer

2000 honda civic Brake lights do not work

Brake lights do not work. replace ball bulbs and relay under brake pedal.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 3 Answers

Did U use the bulb contact/grease **** that autozone & advanced auto always try to sell ya? If so, any more than a VERY VERY light smear, will keep thre from being contact between the socket and bulb. OR >> sometimes the 'wrong bulb' can do that and even convince you that your cars computer is haunted or something. OR >> . I'm sure yo checked your fuses? Both fuse boxes, (or some vehicals have even more, BUT...???) While your with the fuses, use a multi meter to check them. Sometimes they look good and then actually they arent. OR >>>> I've have one of the million metal plates, laid one on top of the other to make thew circuits within the fuse box. Don't let anyone solder a fuse in there. Its easy enough to staighten them out again. Just be careful not to drop them, or mix them up.
Good luck - Jeanebop

Posted on Apr 09, 2010

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why are there no brake lights or high-level stop light?


Suspect failure of the brake light switch attached to the brake pedal inside

Jan 05, 2016 | 2000 Honda Civic

1 Answer

Brake lights on 2000 Honda Civic don't work


Have you checked the bulbs?

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

Apr 18, 2014 | 2000 Honda Civic

1 Answer

Brake lights dont work


Are you sure the brake pedal switch is properly adjusted? You should be able to reach under the pedal with your finger and activate the brake lamp switch. There are two relays in the rear of the car by the brake lights which activate (you can hear them click) when the pedal/switch is depressed. Make sure you also have the correct lamps specified in the owners manual. Usually if the bulbs are no good you will get an indication on the instrument cluster.

Apr 04, 2014 | 2000 Honda Accord

2 Answers

Honda civic pro 94 upper stop light isnt working while lights on


When you checked the fuses, did you check them for continuity or did you check them by eye to see if they were blown? Use a continuity tester that's equipped with a tone alert; this way you don't have to pull the fuses out of the panel- just take the probes and test them while they're in place and listen for a tone. No tone, bad fuse- replace it.

Check the brake pedal's relay too. If everything checks okay, replace the bulb.

Dec 29, 2013 | 1994 Honda Civic

2 Answers

Civic brake lights


Yes,try pulling up the brake pedal with your hand,see if the brake lights go off,if they do,or they do not,the problem will be with the brake light switch on the brake pedal under the dash.

Jun 10, 2010 | 1995 Honda Civic

3 Answers

My brake lights are not working i checked the bulb and the fuse neither is out


check the brake light switch located under the dash,located above the pivot point on the brake pedal arm

Nov 11, 2009 | 2002 Honda Accord

1 Answer

95 Civic Brake LIghts


make sure all of your brake light bulb are double element bulb
there is a single element bulb u used insted of a double
google whatbulb.com

Sep 23, 2009 | 1995 Honda Civic

2 Answers

My tail lights and brake lights stay on even when ignition off


bad earth to lamp clusters usually when tow bar electrics fitted - or chaffed wired in lamp feed

Sep 02, 2009 | 1992 Honda Civic

1 Answer

Brake lights on 2000 Civic EX w/ cruise control do not work when brake pedal is pressed. I had the same problem 2 years ago and the brake light switch was replaced. Where do I locate the brake light...


The break lite switch is located behind the break pedal and it probably doesn't replaced it is probably just stuck. Its fairly easy to get to .

Aug 14, 2009 | 2000 Honda Civic

1 Answer

Electrical fault, Brake-light / Side light


hi simple one the brake light bulb replace the bulbs brake light filiment has gone on one side droped on to the lights circiut hence press brake light headlights come on and vise versa yates210456

Oct 05, 2008 | 2000 Ford Escort

Not finding what you are looking for?
2000 Honda Civic Logo

Related Topics:

303 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...