Turn signal/Hazard light issue. When Hazard button is pressed IN my turn signal lights work fine. When the Hazard button is in the OUT position with the brake pedal pressed down, the turn signal/hazard lights stay on with no blinking, and then do not light up when brake is released. All bulbs, fuses, relays, and even the multifunction switch have been replaced. And all switch wires and terminals, ground wires, and bulb sockets and wires are intact and corrosion free.
Can you just check to make sure the ignition key switch is not staying over to far and not backing off when you try to start it. I had a truck that did that and it messed up my turn signals until I brought the key switch back a little after starting it. Just a simple idea. Be kind with your rating for me. Raz
1,208 views
Usually answered in minutes!
×