You shouldnt have to bleed anything when just doing brakes,unless you opened the bleeders and this did not have to be done, if this is what was done then bleeding is needed,close all bleeders, have someone in car, pump pedal 3 times and hold down open bleeder tell them to keep preasure on pedal as it goes down then close bleeder and then tell them to pump again and hold do this a few times on each side starting at the right rear wheel then to left rear then right front then left front always keep an eye on fluid level in master cylinder always keep it full, dont let it empty, bleed all wheels,
Are your discs worn? Severe wear on a disc could cause a ridge on the edges of the disc, which means that the pad won't seat properly. No amount of bleeding will solve this. Replace the discs or have them resurfaced.
195 views
Usually answered in minutes!
×