-
Contributor
181 Answers
- Posted on May 07, 2010
Re: Torque specs for cylinder head on a 200 ford focus...
- CAUTION: Always install new cylinder head bolts. NOTE: Lubricate the cylinder head bolts with Super Premium 5W 30 SAE X0-5W 30-QSP or equivalent meeting Ford specification WSS-M2C153-G prior to installation. Install the cylinder head assembly and tighten the cylinder head bolts in the following sequence.
- Tighten all bolts in a single sequence to 50 Nm
- Back the bolts off 1/2 turn.
- Tighten the bolts in sequence shown to 50 Nm .
- Rotate all the bolts in a single sequence an additional 180 degrees in two steps of 90 degrees each.
9 3 1 5 7
8 6 2 4 10 sequence for head
Spec for rod 38Nm
×