1994 LeSabre: My 1994 Buick Lesabre is stalling out when the eng...

Engine Stalling Due to Mass Air Flow/Crankshaft Position ...

repairpal.com > Problems > Buick > LeSabre
Buick LeSabre Engine Stalling Due to Mass Air Flow/Crankshaft Position Sensor Failure. This is a verified problem based on 124 reports. Learn more ... 1994 Buick LeSabre90,000Visitor ... The engine just shut down today , its like its not firing.

engine idle then take a screwdriver and hit lightly the MAF sensor if engine stall then maf is defect.

its a ground problem.check for loose/broken ground cable bolted to the bell housing by starter.

First sign of ignition switch failing

If you've checked your coolant and the gas is good it is likely the timing is off drastically and it needs fixed. I don't remember if that car has a chain or belt. I know most manufacturers change intervals on timing belts run from 60-90 thousand miles.Good luck those are nice cars when they are running well.

Replace crank sensor.

Hi. Begin by changing your fuel filter. Joe

4 thumbs up please

Try a crank sensor yet?

check for possible crank sensor failure and check for broken linkage at throttle body. problems may not be related.

I had the same problem with my 1994 Buick LeSabre. It turned out to be the idler solenoid that is mounted on the top of the engine where the fuel injector is located. The solenoid cost around $80.00 to replace it. I hope this helps you.