Hi,
The crank sensor is on the front (belt) side of the engine. From all the way towards the bottom right behind the crank pulley. You have to remove the vibration damper and pulley to get to it. You can see that it will be having two wires running to it.
Thank you !
SOURCE: cant find my crank position sensor on 97 chevy cavalier z24
On 2.2L 4CYL VIN[4] It's located on rear side of cylinder block below coil module.
On 2.4L 4CYL VIN[T] It's located on front side of cylinder block almost dead center.
SOURCE: Crank positioner sensor on a 2005 cavalier 2.2 ecotec
hello , yes it does . otherwise known as the CKP
a picture of its location is this link .
http://www.autozone.com/addVehicleId,2968401/initialAction,repairGuide/shopping/repairGuide.htm?pageId=0900c152800a2490
SOURCE: 97 Chevy Cavalier misfiring
Sounds like it's you spark plug leads. Depending which engine you have in there, if you have the 2.4L then it is a module.
Testimonial: "Thanks SOOOOOO Much"
SOURCE: tps sensor on a 2002 chevy cavalier
Find where the throttle cable goes the the throttle body. Now on the opposite side of the throttle body is the TPS 3 wires/plug.
1,643 views
Usually answered in minutes!
×