98 dodge ram 360 firing order. #1 cylinder location

it all depends on if you have a v6 or a v8 under the hood... v6-1,6,5,4,3,2 with number one at the front right engine cylinder and number two on the left front engine cylinder, number one on the distributor cap should be at 9 o' clock when looking at the engine from the front... v8-1,8,4,3,6,5,7,2 also number 1 cylinder at the engine's front driver's side, with number 2 cylinder on the passenger side most front cylinder, number one on the distributor cap should be at 7 o' clock when looking at the front of the engine... also both distributor shafts run clockwise, so should your firing order... or ya bang...

looking from front of engine left side cylinder location numbers are 2,4,6,8,
right side
cylinder location numbers are 1,3,5,7

the firing order is 1,8,4,3,6,5,7,2

hope this helps

3.9L V6 engine firing order is 1-6-5-4-3-2, cylinders on the pass side front to back are 2-4-6, cylinders on the driver side front to back are 1-3-5.

For the 1998 Dodge Ram 1500 5.2L V8:
It is the same for the 2WD and 4WD

Firing Order:
1-8-4-3-6-5-7-2

Cylinders:
..........(back)
_____..........._____
|...8...|..........|...7...|
|...6...|..........|...5...|
|...4...|..........|...3...|
|...2...|..........|...1...|
..........(front)

Distributor:
........(back)
............3
....4..............6...
.......................(+)-screw: rounded-end of Cap
8......................5
(+)-screw: square end of Cap
.....1...............7
..............2
.........(front)

Rotation: Clockwise

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!

For the 1991 Dodge Ram Charger 360cubic inch = 5.9L V8.

Firing Order:
1-8-4-3-6-5-7-2

Cylinders:
.........(back)
_____........._____
|...8...|........|...7...|
|...6...|........|...5...|
|...4...|........|...3...|
|...2...|........|...1...|
.........(front)

Distributor:
...........3
.....4...........6..(+)-screw
8.....................5
(+).1...........7
...........2

Please don't forget to rate:

You didn't post your engine size so please pick the applicable diagram:



1996-98 4.3L Engines Firing Order: 1-6-5-4-3-2Distributor Rotation: Clockwise



1996-98 5.0L, 5.7L and 7.4L Engines Firing Order: 1-8-4-3-6-5-7-2Distributor Rotation: Clockwise




4.3L Engines Firing order: 1-6-5-4-3-2 Distributor rotation: Clockwise



4.8L, 5.3L and 6.0L Engines Firing order: 1-8-7-2-6-5-4-3 Distributorless ignition system (one coil on each cylinder)



5.0L, 5.7L and 7.4L Engines Firing order: 1-8-4-3-6-5-7-2 Distributor rotation: Clockwise

Distributor turns clockwire rotation
From the front of motor

1 - 3 - 5 - 7 Drivers side front to rear
2 - 4 - 6 - 8 Passenger's side front to rear

For all Dodge V8 truck engines, the firing order is 1-8-4-3-6-5-7-2. For all Dodge V6 truck engines, the firing order is 1-6-5-4-3-2. For Dodge inline 6 cylinder engines, the firing order is For all Dodge 4 cylinder engines, the firing order is 1-3-4-2 All dodge distributors rotate clockwise.


look at your distributor cap while standing on the driver's side of the vehicle.
Start at number 1, which is labelled on the cap, and go
clockwise

Good Luck

Here you go:
5.2L and 5.9L engines Firing order: 1–8–4–3–6–5–7–2 Distributor rotation: Clockwise

Diagram link below:

http://www.chiltonlibrary.com/content/images/7924/images/79243g14.gif

Best of luck!
Greg