SOURCE: Saturn SW1 (97) outside RR door handle wont work,
YOU SHOULDN'T SEE THE INTERIOR ROD MOVE BECAUSE THE OUTSIDE HANDLE HAS IT'S OWN ROD THAT CONNECTS TO THE DOOR RELEASE THAT IS REALLY SHORT. IT MOVES DOWN WHEN THE HANDLE IS PULLED UP. TAKE OFF THE THREE SCREWS THAT HOLD THE DOOR CATCH ON THE DOOR AND YOU WILL SEE THIS SMALL ROD. I HOPE THIS HELPS YOU. LET ME KNOW. GOOD LUCK
SOURCE: Honda Accord Outside handle broken and Child lock is on.
Remove the panel and disable the child lock or some cars have an option to just bypass the child lock either or
SOURCE: The door on my 1998 honda civic won't open
USE A SLIMJIM TO RELEASE THE DOOR LOCK,INSIDE THE DOOR, THEN ONCE OPENED YOU CAN PULL THE PANEL OFF AND FIX THE LOCK THE WAY IT SHOULD DE
SOURCE: Want to replace the drivers door lock cylinder on
it is a pushfit spring washer that holds the outer ring in position.if you prise it off you may have to replace it.
SOURCE: Remove the door panel on a 98 Honda Civic
You should have some little plugs in the plastic edge on the bottom that can be popped off, that will expose screws, there is maybe one screw behind the door handle, and maybe a couple in the door pull. Then once it is unscrewed, pop off the plastic retainers that hold it the rest of the panel and up it goes, past the lock button and off, except that it is still connected by wires, you should be able to see what's going on behind the handle without taking the wires loose, just lean it up against the door or the car. There is also a plastic wind barrier stuck on there with the stickiest stuff you ever saw, take off your watch. Hope this helps.
133 views
Usually answered in minutes!
×