SOURCE: firing order
Hi..
Your 00 taurus 24v,
Use a Direct ignition, It's mean COIL on PLUG.
Each cylinder use one coil.
The firing order is ; 1-2-3-4-5-6..
The cylinder 1-2-3 are located at the FIREWALL side, starting from the Belt Side..
4-5-6 are Located at the Radiator side, starting from the belt .
SOURCE: firing order for 97 f150 4.6l
No problem,
Firing order is 1-3-7-2-6-5-4-8 and here is a diagram of the ignition coils and plugs;
1 6
front 5 3 1 2 3 4
of
vehicle 4 7 5 6 7 8
8 2
Please remember to rate this answer.
SOURCE: FIRING ORDER FOR 97 5.8L EFI FORD MOTOR
did a search under Google images and found this for a 5.8
SOURCE: replace a serpentine belt on a 97 ford taurus
use a 15mm box wrench on the nut retaining the tensioner pulley to pry the tensioner 'arm' against the spring to release belt. note belt routing on decal under hood,or make a sketch,to aid in replacement.
on OHV engine rotate clockwise
on OHC rotate counter clockwise
be sure belt is completely seated on pulleys
793 views
Usually answered in minutes!
×