P0700 Transmission Control System Malfunction
P0750 Shift Solenoid A Malfunction
It seems you have a internal transmission problem, I suggest you have your transmission inspected by a reputable transmission shop.
Testimonial: "Thank You ur advice is right have a nice day"
Howcanifixtheproblembutmycheckenginelightdidnotcomeon
SOURCE: P0700, P0750 and P0755 codes
Trouble Code: P0750
A/T Low/Reverse Solenoid Circuit Failure
Possible Causes:
L/R solenoid control circuit is open or shorted to ground
L/R solenoid control circuit is shorted to system power
L/R Solenoid is damaged or has failed
TCM or PCM has failed
Trouble Code: P0755
A/T 2/4 Solenoid Circuit Failure
Possible Causes:
2/4 Solenoid control circuit is open or shorted to ground
2/4 Solenoid control circuit is shorted to system power
2/4 Solenoid is damaged or has failed
TCM or PCM has failed
Trouble Code: P0700
Automatic Transmission Control System Malfunction
Possible Causes:
The presence of this code means the TCM detected a problem
TCM related Sensor has solenoid is damaged or has failed
This code is for information only - check for other TCM codes
TCM or PCM has failed
SOURCE: i have a p0750 code & a p0700 code for 2005
Replace the pressure shift solenoid A, the one for the first gear - in your case they no longer close so the clutch on the first gear slips and you have no traction at start. You will have to drop the pan to access it.
SOURCE: I have a 2006 Dodge
P0750-Low Reverse SOLENOID CIRCUIT
This DTC is strictly an electrical fault and cannot be caused by any internal transmission failure other than an open in the Transmission Solenoid/TRS Assembly. If the Transmission Solenoid/TRS Assembly is in need of replacement - do not replace the Valve Body.
To replace the TRS assembly you need to remove the valve body first and then the TRS assembly is mounted on top of the valve body.
SOURCE: Transmission errors
the p0750 is a shift solenoid A malfunton,whice in turn will set the p0700 code,if you change the shift solenoid that should get rid of both codes.
SOURCE: My truck is giving me the codes p0700 and p0750
Shifter solenoid "A" is bad this is not a repair for the average JO you have to dissassemble the transmission to repair or replace this solenoid. But first check to make sure the wiring harness that plugs into the transmission is OK if it is there is nothing you can do take it to a Transmission Shop. If you keep driving it like this you will eventually and it won't take long damage the whole transmission and it will be alot more costly.
4,281 views
Usually answered in minutes!
nothing, u must diagnose the problem 1st.
×