On the console, where the oil change light is on, scroll through the items until you get to oil life. Once at oil life, hold the reset button and it will say Engine oil new. Press reset again and this should set you oil life back to 100% .
SOURCE: 2006 mercury mountaineer interior lights will not shut off
There is some problem with the door switch(s) which should turn the lights off when the door is closed. Look closely at the switch and make sure that the proper contact is being made within the switch. There could be corrosion.
SOURCE: How do I reset the oil change light on a 2006
there are two types of displays heres both.hope this helps.for base instrument cluster.
1) press and release trip/reset button until setup menu hold reset displayed
2)press & hold trip/reset untilreset for sys check or sys check hold reset is displayed
3)release trip/reset button
4)press and release trip to scroll until hold reset if new oil is displayed
5)press and hold resetuntil oil life set to 100% and let button go you are done.
if you have a message center dash display then do this one. 1)push and release setup button until you see press reset to begin (2)press& release reset button until hold resetif new oil is displayed.(3)press and hold reset for 2secondsuntiloil set to 100%. done. hope this helps.
SOURCE: How do you reset the change oil message on a 2007
Ford Explorer,
Mercury Mountaineer, 2002-07
To reset CHANGE
OIL SOON/OIL CHANGE REQUIRED message on the Message Center, press
the SET UP control to access the System Check mode. Press and
release the RESET button to display “OIL LIFE % HOLD RESET NEW” is
displayed. Press and hold the RESET button for 2 seconds until “IF
NEW OIL HOLD RESET” is displayed. Press and hold RESET button until
“OIL LIFE SET TO 100%” is displayed.
Ford Five Hundred,
Freestyle, Mercury Montego 2005-06 Tap the ODO/TRIP button to toggle
the display between the odometer and trip odometer. Tap on the
ODOiTRIP button again to toggle the display between the trip
odometer and OIL LIFE % display. Press and hold the ODO/IRIP button
for 2 seconds or more to display OIL LIFE 100%. Your oil life in now
reset.
5,042 views
Usually answered in minutes!
×