At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
94 del sol auto transmission problem, drives fine at first then trany goes completly, all at once, shutt it off for 20secs restart works fine for another 30 secs, ecu? selenoid?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
CHECK AN MAKE SURE CLIPS ON END OF THE CV JOINT ASSEMBLY IS THERE ,THE PART THAT GOES INTO THE TRANS, IF ITS NOT THERE THE INNER SHAFT WILL COME OUT OF THE TRANS ,THAT CLIP HOLDS IT THE TRANS
If your transtop roof has just failed.Try this reset,turn ignition OFF,Remove back up fuse under bonnet,7.5amp number 32 for 20secs.replace fuse this will reset roof control unit.
this is what a automatic trans does when it is failing, it will need to be torn down and inspected for worn and damaged parts, there are any number of things that cause this, leaking valve body, front pump O ring leaking, u will most likely need it rebuilt.
There is a pressure sol. in the transmission that is bad . This is a common problem that requires removal of the side transmission cover. The transmission does not need to be rebuilt! Talk to a gm dealer. I have sold over a hundred of these pressure sol. and the side cover gaskets to a real gm transmission mechanic that have fixed this problem. GM parts over 20 years.
I know exactly what you are talking about, it will go high to about 2 to 4k rpms, then back down to 1k in intervals of about 3 seconds. It is either the idle air position sensor, or the throttle body position sensor, hondas are famous for it. The parts are cheap, about $20-$30, and fairly easy to install when you find it. I suggest a Haynes Manual for installation to make it a lot easier if you don't know where it is. Good luck, hope all goes well.
Anything that is OBD 1 or newer if you want it to be legal, here are the most common options and the basic requirements. 1. B16A2/3: Completely bolt-in Swap, VTEC needs to be wired, SIR II, Hasport shift linkage. Del Sol VTEC for the del sol 2. B18B: Completely bolt-in swap, SIR II, Hasport shift linkage. Del Sol VTEC for the del sol 3. B17A: Completely bolt-in swap, cable-hydro transmission kit(not recommended) or hydraulic b-series transmission, VTEC needs to be wired. 4. B18C1: Completely bolt-in swap, VTEC needs to be wired. 5. B18C5: Completely bolt-in swap, OBD conversion, VTEC needs to be wired. 6. B16B: Completely bolt-in swap, OBD conversion, VTEC needs to be wired. 7. H22A: Mount kit required, Hasport shift linkage, VTEC needs to be wired. 8. B16A: Not recommended! Too much work, more costly compared to B16A2/3's. 9. D16Z6: Completely bolt in, VTEC needs to be wired. 10. D16Y8: Completely bolt in, VTEC needs to be wired. If you want to know more check this out - http://hondaswap.com/swap-articles/en gine-swaps-101-a-29052/
×