Question about 1998 Chevrolet S-10 Pickup

1 Answer

Fuel pump 1998 s10

I replaced my 1998 s10 fuel pump, i cant get it to come on, i tired all the fuses and they are good, still no sound from the unit, any advise

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 518 Answers

Check for power & ground to pump with key on. If none check fuelpump relay in glovebox.

Posted on Jun 25, 2010

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I replaced my 97 s10's fuel pump checked the fuses &checked the relay & reset my computer changed my fuel filter disconected my security system & still can't get my fuel pump to co


The oil pressure sending unit could be bad. If your oil pressure gets below 7psi than it shuts off all power going to the fuel pump. It is screwed into the engine block just to the right of the distributor.

Oct 13, 2012 | 1998 Chevrolet S-10 Pickup

2 Answers

NEED TO KNOW WHERE THE FUEL PUMP RELAY SWITCH IS FOR A 1998 CHEVY S10 TRUCK...


For the 1998 s10 theres no fuelpump switch, there is a fuelpump relay. the relay is in the engine compartment inside the fuse/relay box. the relay will be labeled on the inside cover of the fuse/relay box cover. besides the relay the only other problem for a fuelpump not working on these trucks is the fuelpump is bad or the wiring connector to the pump is bad.

Aug 27, 2011 | Chevrolet Chevy Cars & Trucks

1 Answer

How do you reset a fuel pump in a 1998 chevy s10 truck 2.2 liter engine, 2 wheel drive? The truck hit a curb going pretty fast and now when you turn the key on the fuel pump does not come on. Is there an...


No, no reset for an S10. There would be a fuel pump relay under the hood in the fuse/relay block. And also a 10 or 15 amp fuse for the pump at this junction block as well.
Check the fuse, then find the tank electrical connector, pull it apart and find the gray wire -the fuel pump wire. Clip a test light lead to ground then put the tester probe into the gray wire terminal on the harness side of connector. Now have a helper turn the key to start and crank the engine over. The test light should light up if your electrical circuit is working. Before you drop the tank to investigate the fuel pump (it probably needs replacing), check if the ground for the pump is alright. Maybe when you hit the curb, you jarred loose the ground connection.

Jan 24, 2018 | 1998 Chevrolet S-10 Pickup

2 Answers

1998 Chevrolet S10 truck Is Not getting gas. We Have Replaced the Fuel pump and the crankshaft Sensor and had the ignition Sensor tested which test good.Would like to Know what else to do to try to fix it.


So is the pump running or not? fuse good? relay good? Fuel pressure is???you may need to have a repair shop check it, you dont want to waste anymore time and money guessing.

Mar 12, 2010 | 1998 Chevrolet S-10 Pickup

2 Answers

Fuel pump 98 s10


Hi:
You must first drain and lower the fuel tank, as your pump is mounted inside. With the fuel tank supported, undo the tank mounting straps, and the filler hose, then slowly lower it until you can disconnect the fuel lines and electrical harness. The pump assembly is now accessable. Remove and replace the assembly , then reinstall the tank .

Dec 21, 2009 | 1998 Chevrolet S-10 Pickup

1 Answer

Having problems with chevy s10 replaced fuel pump


Check the cable that goes from your battery to the fuse box the relay that is clicking is on. Check for lose bolts or corrosion of the contacts or something like that. If the relay is clicking it sounds to me like it is a voltage issue going to the relay.

Oct 05, 2009 | 1998 Chevrolet S-10 Pickup

5 Answers

Where is the oil sending unit located on a Chevy S10 Pickup.


MY S-10 IS LEAKING OIL. I WANT TO KNOW WHERE THE OIL SENDING UNIT IS.

May 29, 2009 | 1998 Chevrolet S-10 Pickup

Not finding what you are looking for?
1998 Chevrolet S-10 Pickup Logo

428 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...