Question about 2002 Chevrolet Silverado
Posted by Anonymous on
Waiting 15 years to try and figure this out , does not make good sense to me . you could try taking it to a good mechanic and have MAF cleaned or replaced
Posted on Aug 10, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
COULD BE A VACUUM LEAK TAKE PROPANE TORCH AND LEAVE OFF PUT AROUND ALL VACUUM POINT WHERE YOU SUSPECT COULD POSSIBLY LEAK ENGINE SPEEDS UP THAT'S IT WORTH A SHOT BEFORE SPENDING MORE CASH
Posted on Nov 27, 2008
Find out why the engine light is coming on, it is the info u probably need to fix the running rough problem. Most auto parts stores will read the codes stored in your trucks computer for free, write them down, and ask what they mean and how to correct the problem. If u need more info, return to this site w/ codes for further help.
Posted on Dec 30, 2008
Check your o2 sensor voltage, those trucks are real bad for o2 sensors, and yes if one sensor is reading 0mv, the others will start to drop out, and the vehicle will run very, rough. You also may check fuel system pressure, should be almost 60p.s.i. If its alot lower, Id be looking into a fuel pump. If that vehicle is drive-by-wire (no throttle cable), the throttle bodies get very dirty and cause that concern also. Id start by having the vehicle scantested.
Posted on Feb 07, 2009
SOURCE: IDLE PROBLEM
Here are some of the causes of surges, stalls at stops, slow idle speed, erratic idle speed, rough idle and engine hesitation (and other problems), it is in most cases the idle speed control air-bypass valve and or throttle valve and upper intake, these area's get full of gunk and combustion residue over the miles and cause idle issues (stalls, low idle) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.
Posted on Apr 14, 2009
have the car checked when the check engine light is on,also a good scanner will be able to give you the history codes,get back to me with the codes and we'll go from there. you need someone with a professional scan tool
Posted on May 13, 2009
Tips for a great answer:
Feb 15, 2014 | 2001 Volkswagen Jetta TDI
Jan 13, 2014 | Cars & Trucks
Dec 13, 2013 | 2000 Chevrolet Silverado 1500
Sep 04, 2011 | 2002 Ford Escort
Aug 18, 2010 | Chevrolet Silverado 1500 Cars & Trucks
May 06, 2009 | 2002 Audi TT
Feb 02, 2009 | 2003 Chevrolet Silverado Ss
Jul 24, 2008 | 2002 Saturn SC
Mar 29, 2017 | 2002 Chevrolet Silverado
323 people viewed this question
Usually answered in minutes!