SOURCE: dodge spirit flasher location
You remove a few phillips head screws on the cover beneath the dash under the knee panel. The hood release is attached to the panel. You can reach it from below or remove the knee panel around the fuse box door. Look for the screws around the trim piece. It's a fairly simple process. It's a small, silver, and looks like a little can. I hope this helps. Don't forget to rate my answer, thanks.
SOURCE: water pump replacement procedure 2005 2500 dodge with cummins diesel
take off old water pump. clean up area on the motor real good.do this by using a scrapper and cleaning slolvent. when thats all done put hi temp silicon on the block water pump and the put gasket on silicon. let dry for like five minutes. put in on torque bolts to specs.
SOURCE: fcm location
The FCM is somewhere in the passenger compartment (in dash) location. The best solution is to take the vehicle into an authorized service dealership and have them diagnose this issue.
SOURCE: FCM
2006 MODEL YEAR TRUCKS INTEGRATED THE FRONT CONTROL MODULE(FCM) IN THE FUSEBLOCK..IT IS CALLED THE TIPM..TOTALLY INTEGRATED POWER MODULE..IF YOU'RE HAVING SOME ELECTRICAL CONCERNS,CHECK CONNECTORS ON BOTTOM OF THIS MODULE FOR CORROSION
SOURCE: number one injector bank on 2006 dodge cummins
you'll notice on your valve cover gasket there is two connectors.. the one up front is your 1-3 the one in the rear is your 4-6... you can remove your valve cover and check the connections from the injector connectors to the
connectors on the valve cover.. check for an open.. however you could also have a fault internally in 1 of your injectors in that bank as well.. hope this info helped..
139 views
Usually answered in minutes!
×