2006 Suzuki Forenza Logo

Related Topics:

Posted on Jul 17, 2010
Answered

Headlight cover How do you take off the headlight cover to get to the bulb?

Answer This Question

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Jul 18, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.

Joined: Jul 18, 2010
Answers
1
Questions
0
Helped
73
Points
1

The cover doesn t come off you have to remove the things behind the light like the battery and the caps screw off

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to change headlight on 2000 galant
  • 1
    Place the Mitsubishi on a flat service in park. Set the parking brake before continuing.


    • 2Open the Galant's hood and locate the headlight cover -- roughly 3-inch wide circular piece of plastic -- behind the headlight bulb intended for replacement. Turn this cover clockwise to unlock it and pull it from the headlight assembly, exposing the headlight socket below it.


    3

    Hold the rear of the headlight socket and turn it counterclockwise to unlock it. Pull the headlight socket and bulb from the headlight assembly.


    4

    Grab the bulb and pull it from the socket with a slight wiggling motion.


    5

    Pick up the new 9003 headlight bulb using a clean, lint-free cloth and line up its prong with the slots in the socket. Never tough the bulb with your bare hands, as the oils left by your hands can cause the bulb to burn out prematurely.


    6

    Slide the socket and new bulb into the headlight assembly and turn the socket clockwise to lock it into place.


    7

    Place the plastic cover behind the bulb and turn it counterclockwise to lock it into place.


    8

    Repeat Steps 1 through 7 for the headlight bulb on the other side of the Galant, if needed.


    9Close the Galant's hood.


    Read more: How to Put in a Headlight Bulb on a 2000 Mitsubishi Galant ' eHow.com http://www.ehow.com/how_8210819_put-bulb-2000-mitsubishi-galant.html#ixzz27iQwCdOe

    Read full answer
    Sep 27, 2012 • 2000 Mitsubishi Galant
    2helpful
    1answer

    How to remove front headlight assembly
    Hi,

    1 Open the RAV4's hood. Locate the back of the headlight assembly, just behind the headlight. You should see a ring-shaped plastic cover.

  • 2 Turn the locking plastic ring clockwise about 1/2 inch and it should pop off.
  • 3 Remove the rubber grommet covering back of the headlight. Simply pull it out of the headlight assembly.
  • 4 Depress the spring latch holding the bulb in place behind the headlight. This is a wire latch that looks somewhat like a bent paper clip. Press it down and move it to the side, away from the light bulb. It should come free and flip open, freeing the bulb.
  • 5 Disconnect the light bulb from the plug. Replace it with the new light bulb, and replace the latch and rubber grommet. Replace the plastic ring cover and turn your headlights on to ensure proper installation.

    • Thanks
    Read full answer
    Aug 07, 2011 • 2003 Toyota RAV4
    3helpful
    1answer

    How do you replace the headlight on a 2002 Daewoo Lanos
    Hi there, together with providing you the solution to the problem, I also took the liberty of going one step further in giving you steps on how to remove the headlight bulb.

    • Find the hood release handle and activate it, the hood should pop open.
    • Once the hood is popped open locate the hood secondary or safety latch and release it. Then finish opening the hood.
    • Locate and remove mounting clips for any plastic shields that cover the headlight lens mounting screws or clips.
    • Some headlight bulbs can be replaced by simply grasping the bulb socket behind the headlight lens and turn it counter clockwise to remove it. This will expose the headlight bulb.
    • If the headlight bulb socket is not accessible the headlight lens may need to be remove or obstructions behind the bulb removed to gain access to the headlight bulb socket.
    • To remove the headlight lens remove all mounting screws and clips that hold the headlight lens in place.
    • After the headlight housing has been removed from it's mounts, release the headlight bulb from the headlight lens housing (turn counter clockwise) the bulb will then come out of the headlight assembly. Once removed, visually verify that the replacement bulb is exactly the same as the failed bulb before to ensure a proper repair.
    • Clean the headlight lens free from all debris to help maintain the seal from the bulb to the lens. This will keep moisture out of the lens.
    • Install the new headlight bulb by turning the retainer ring or bulb clockwise.
    • Re-install the headlight lens housing and reinstall electrical connector.
    • Re-install plastic covers.
    After the job is complete turn the ignition key to the "on" position and activate the headlight switch. Observe the newly replaced headlight bulb to ensure proper operation.

    Glad to be of help!!!
    Read full answer
    Jan 21, 2011 • 2002 Daewoo Lanos
    0helpful
    1answer

    Cant get the bulb out of the headlight
  • Locate the headlight socket cover inside the engine compartment. The cover is on the back of the headlight assembly; it is round and made of plastic or rubber.
  • 2 Remove the headlight socket cover by pulling it off or twisting it to the left and then pulling it off. You can see the headlight socket once the cover is removed.
  • 3 Grip the headlight socket, turn it to the left and pull it out of the assembly. The light bulb is connected to the socket.
  • 4 Pull the bulb straight out of the socket and discard it in a waste receptacle.
  • 5 Plug the replacement bulb into the socket, taking care not to touch the glass. The oils on your skin can shorten the life of the bulb if you touch the glass. Wear gloves to prevent touching the glass.
  • 6 Place the socket back into the light assembly and turn it to the right to lock it in place.
  • 7 Slide the headlight socket cover over the socket and press on it to secure it, or turn it to the right, depending on how you have removed it in Step 2.
  • 8 Repeat Steps 2 through 7 to replace the other headlight bulb.


    • please give good rateing if this helps thank you
    Read full answer
    Dec 28, 2010 • 2001 Mitsubishi Galant
    0helpful
    1answer

    How do I remove halogen low beam head light to replace it?
    Removal & Installation To Remove:
    WARNING
    The halogen fog light bulb contains gas under pressure. The bulb may shatter if the glass envelope is scratched or if the bulb is dropped. Handle the bulb only by its base. Avoid touching the glass envelope.
    NOTE: The headlight bulb should not be removed from the headlight assembly until just before a replacement bulb is installed. Removing the bulb for an extended period of time may affect headlight bulb performance. Contaminants may enter the headlight assembly where they can settle on the lens and reflector. Never turn on the headlights with the bulb removed.
    1. Before servicing the vehicle, refer to the precautions in the beginning of this section. NOTE: Make sure that the headlight switch and the ignition switch are in the OFF position.
    2. Remove the pin-type retainers, screws and the air deflector from the radiator.
    3. Remove the three bolts and the headlight assembly.
    4. Disconnect the electrical connector.
    5. Remove the cover from the rear of the headlight assembly.
    6. If equipped with HID, release the spring tabs to remove the low beam bulb, otherwise disconnect the electrical connector and remove the bulb.
    7. Disconnect the electrical connector and remove the high beam bulb.
    HID low beam headlight bulb lin_tc_0085.gif

    Standard low beam headlight bulb lin_tc_0086.gif

    High beam headlight bulb lin_tc_0087.gif

    To Install:
    1. Place the headlight assembly in the proper position.
    2. Install the cover from the rear of the headlight assembly.
    3. Connect the electrical connector.
    4. Install the three bolts and the headlight assembly.
    5. Install the radiator air deflector.
    prev.gif next.gif
    Read full answer
    Dec 18, 2010 • 2003 Lincoln Town Car
    0helpful
    1answer

    Need to replace headlight lens on a 1996 dodge avenger
    Usually, one has to get the entire headlight assembly to replace the lens.
    Is it cracked?
    If it is just faded, try some anti-haze polish for headlights. This can save you some money compared to restoring the headlamp by replacing the assembly (which may be available from a salvage yard).

    ---
    REMOVAL & INSTALLATION

    CAUTION
    Halogen bulbs contain gas which is under
    pressure. Handling the bulbs incorrectly could cause it to shatter into flying
    glass fragments. Do NOT leave the light switch ON. Always allow the bulb to cool
    before removal. Handle the bulb only by the base; avoid touching the glass
    itself. Whenever handling a halogen bulb, ALWAYS follow these precautions:

    • Turn the headlight switch OFF and allow the bulb to cool before
      changing it. Leave the switch OFF until the change is complete.
    • ALWAYS wear eye protection when changing a halogen bulb.
    • Handle the bulb only by its base. Avoid touching the glass.
    • DO NOT drop or scratch the bulb.
    • Keep dirt and moisture away from the bulb.
    • Place the used bulb in the new bulb's package and dispose of it properly.


    Cirrus, Stratus, Sebring Convertible and Breeze


    1. Open the vehicle's hood and secure it in an upright position.
    2. Disconnect the negative battery cable.
    3. Remove the 2 screws securing the headlight module to the radiator closure
      panel.
    4. Pull out the headlight module from the vehicle.





      Fig. 1: Using a Torxhead screwdriver, remove the 2 headlight
      module retaining screws
      90906p69.jpg






      Fig. 2: Pull the headlight module straight out of the front of
      the vehicle to remove the bulbs
      90906p70.jpg






      Fig. 3: Disconnect the wiring harness for the headlight bulb
      90906p74.jpg






      Fig. 4: Turn the light bulb retaining ring counterclockwise,
      and remove it from the back of the module
      90906p75.jpg






      Fig. 5: Pull the light bulb out from behind the module. Never
      touch the glass of the light bulb
      90906p76.jpg



    5. Detach the headlight electrical connector.
    6. Remove the retaining ring holding the bulb to the back of the headlight
      module.
    7. Pull the bulb from the back of the headlight module. Hold the bulb by its
      base only; try not to touch the glass itself.
      To install:

    8. Holding the bulb by the base, place it in the headlight module, then secure
      with the retaining ring.
    9. Attach the electrical connector to the bulb.
    10. Install the headlight module into the vehicle and tighten the 2 retaining
      screws.
    11. Connect the negative battery cable and check the headlight operation.


    Sebring Coupe and Avenger


    1. Open the vehicle's hood and secure it in an upright position.
    2. Disconnect the negative battery cable.
    3. Remove the sealing cover by rotating it counterclockwise.
    4. Remove the bulb attaching spring and pull out the light bulb.





      Fig. 6: Remove the headlight sealing cover(s)
      90906g28.gif






      Fig. 7: Remove the attaching spring and pull out the bulb
      90906g29.gif

      To install:

    5. Install the bulb into the headlight module.
    6. Install the bulb attaching spring.
    7. Install the sealing cover.
    8. Connect the negative battery cable and check the headlight operation.


    prev.gif next.gif
    Read full answer
    Oct 07, 2010 • 1996 Dodge Avenger
    2helpful
    2answers

    I don't know how to take off the head light lens cover on my nissan maxiuma
    Probably not a lens cover at all. It's just a 1 piece plastic headlight. It you are wanting to replace a bulb , they go in from the back . Open the hood and you should be able to see where the wires to the bulb go in the back of the headlight.
    Read full answer
    Nov 06, 2009 • 1997 Nissan Maxima
    2helpful
    1answer

    Change headlight bulb
    Removal & Installation Bulb Replacement To Remove:
    1. Release the spring clip and remove the protective cover from the rear of the bulb.
    2. Disconnect the electrical connector from the bulb.
    3. Remove the spring clip and remove the bulb from the headlight housing.
    To Install:
    CAUTION
    Do not touch the glass portion of the new bulb with bare hands.
    1. Insert the bulb in the housing.
    2. Secure the bulb with spring clip.
    3. Connect the electrical connector to the bulb.
    4. Install the protective cover on the headlight assembly.
    Headlight Assembly
    Read full answer
    Jul 16, 2009 • 2004 Volkswagen Jetta
    7helpful
    2answers

    Headlight repair on 2003 Mercedes Benz E320
    how do you change left low beam bulb on 2003 mercedes e320
    Read full answer
    Mar 15, 2009 • 2003 Mercedes-Benz E-Class
    3helpful
    1answer

    Headlights 2001 Dodge Durango
    headlight cover does not have to be removed. Open your hood and reach in to the back of the headlight assembly grasp the main headlight plug and pull while turning counter clockwise. the bulb should come out with the plug, the bulb will then unclip from the plug, good luck
    Read full answer
    Mar 01, 2009 • 2001 Dodge Durango
    Not finding what you are looking for?

    View Most Popular

    2006 Forenza

    • Cars & Trucks

    Related Question

    How to change headlight on 2000 galant

    • 2000 Mitsubishi Galant

    Related Topics

    83 views

    Ask a Question

    Usually answered in minutes!

    Popular Questions

    Transmission sensor problem

    2006 Suzuki Forenza

    I would like a diagram

    Suzuki Forenza Cars & Trucks

    Fault Code P2135

    2006 Suzuki Forenza

    2007 Suzuki Forenza. It is

    2007 Suzuki Forenza Sedan

    White Smoke From Tail Pipe/Exhaust

    2004 Suzuki Forenza

    Check Out the Latest Top Trucks Report!
    Check Out the Latest Top Trucks Report!

    View all Fixya Reports

    Top Suzuki Experts

    ZJ Limited
    ZJ Limited

    Level 3 Expert

    17989 Answers

    Thomas Perkins
    Thomas Perkins

    Level 3 Expert

    15088 Answers

    Ronny Bennett Sr.
    Ronny Bennett Sr.

    Level 3 Expert

    6988 Answers

    Are you a Suzuki Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    PDF Manual
    . 2006 Forenza Manual

    2006 Forenza

    Loading...