Does the fuel pump out of a 2006 Tiburon (2.7V6) fit an 04 Tiburon (2.7V6)

Have you tried driving the old fuel out of it and getting some fresh gas into it? Todays fuel sucks.

The 2 holes are just so rusty, you don't see the threads. 8 or 10 mm bolt fits the hole.

images for Where is the ECM fuse and Fuel pump ..

ECU fuse keeps blowing - New Tiburon Forum : Hyundai Tiburon ...

www.newtiburon.com/.../tiburon.../217243-ecu-fuse-keeps-blowing.html

Sep 8, 2012 - 18 posts - ‎8 authors
Edit: Instead, pull the fuel pump relay, and see if the fuse still blows when ... ControlRelay, Fuel Pump relay, A/T control relay, Generator, ECM ... Official "Check Engine Light" Thread - New Tiburon Forum ...
Jul 22, 2014
Fuel pump Relay
Apr 26, 2013
Starting problem. Fuel pump doesn't prime with key on.
Mar 9, 2013
Fuel pump not starting intermittently
Oct 6, 2010
More results from www.newtiburon.com

Car Cranks But Will Not Start - Hyundai Forums : Hyundai Forum

www.hyundai-forums.com/...2000.../85246-car-cranks-but-will-not-start...

Jan 17, 2008 - 10 posts - ‎6 authors

Maybe. I would also check fuel pressure.

The Fuel pump relay is a non serviceable relay ( built into the fuse panel ) in the 04-08 MY F-150s.

Did you check the Fuel Inertia switch ( in the passenger side kick panel by the fuse panel ) ?

If you are having a no fuel pressure issue, might want to take a look at the FPDM ( Fuel Pump Driver Module ) on the cross member above the spre tire ( need to drop the spare to see if ).

There is an issue with 04-07 ( 04-06 ?? ) MY trucks where the FPDM is bolted directly to the cross member, and dissimilar metal corrosion happens and builds up behind the FPDM, causing it to break.

Here are some before and after pictures from my 2006, I replaced mine for the heck of it and found that the case had cracked with ~ 51K miles on it, soon the PCB would have cracked leaving me stranded





New version of the FPDM with the stand off studs


This is the kit I got ( check that the Part Number has not been changed )

Hi There,

You will find the second fuse box on the right hand side of the steering wheel (australian - left hand side if in america) located underneath the power "mirrors" button. Follow the side power "mirrors" button down until you reach a false wall, unfasten this. another word for this is the "fascia"

Hope this helps

Cheers Buckaroo,
Chris

chang the fuel filter

try for temp use, turn key to on position and wait 3sec then try to start. You might have a fuel injector leaking pressure while system is shut off. There is also a fuel pressure regulator that is supposed to work as a check valve. If it leaks down psi then it could cause hard to start. By turning key and waiting the fuel pump primes for intial start.

Go to the r/r caliper, pump the brake pedal three times and hold down, open bleeder to run fluid out, close bleeder, let foot up off brake pedal. Repeat LR, RF, LF calipers. This is called a pressure bleed. Take note whether you got any air out of the bleeders.

Researched wiring diagrams for the fuel system on the 1004 Tiburon (4 & 6 clylinder engines). There is no fuel cut-off switch/circuit. There is only the fuel pump relay that supplies power to the fuel pump.
Here's the wiring diagram: