Hi hope this helps you out.
REMOVAL & INSTALLATION
See Figure 1
1998 dodge grand caravan turnnig lights don't work - 0900c1528003c797.jpgmages/0900c1528003c797.jpg" alt="0900c1528003c797.jpg" class="h_mi" />
Fig. Fig. 1: The turn signal (multi-function) switch is attached to the steering column by two screws
CAUTION
The Supplemental Inflatable Restraint (SIR) system must be disarmed before working around the air bag or SIR system wiring. Failure to do so may cause accidental deployment of the air bag, resulting in unnecessary SIR system repairs and/or personal injury.
To install:
Reconnect the negative battery cable and check all functions of the combination switch for proper operation.
Let me know if theres anything else I can help with. Thank You for using fixya.........iluv2fish........Ray.......
Testimonial: "Thanks a lot, it worked"
The multifunction switch is located on the steering column by the steering wheel. most cases you would have to remove the steering wheel to remove it but others you would just have to remove the steering column covers just behind the steering wheel to access it. please note thet if the steering wheel has to come off care must be taken when dealing with the air bags, it is best that you take the battery terminals off and wait 3 min before you proceed to remove the steering column.
vbninja E.A.P.
Testimonial: "Thank you very much."
374 views
Usually answered in minutes!
×