At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Hi i have a clk 320 model 2005 , but the radio isn't working only the cd box, is there any code or anything that i should enter to put it into service , if yes , how???
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I must admit I've not seen that particular problem but I would try to get the radio into anti theft mode by disconnecting the negative battery cable for awhile. Then enter your radio code and press the scan button and see if goes back to radio mode. Let me know how you make out.
In the fuse box under the hood, fuses 3, 6, 7, 10, and 12 are all directly related to the sound system. In the trunk, fuses 3, 6, and 7 are also directly related to the sound system. Please check all the fuse.
And also unplug the CD changer's power and fiber cable and then recheck the radio.
The wait time for these is usually about 24 hrs. Have you tried calling the dealer to see if there is an over-ride code and do you have the proper code to enter? If you call the dealer, you will need the vin and registration.
I purchased a MB CLK 320 and set the radio frequency and successfully put the freq in memory, however, the radio blinks tthe freq. Is this normal or do I have to enter another key to stop the radio from blinking? Ed Massachusetts
I had the same issue with the radio code error lock on a 2005 CRV. I was unaware of the code procedure and had locked the radio in the "ERROR E" mode. I was able to unlock the radio by pulling the #9 back up fuse located in the fuse box in the engine compartment. This reset the radio to CODE which then allowed me to input the 5 digit number which I had in my glove box along with my owner's manual. I am happy to report I now have a working radio/ CD player.
×