- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Does it crank over? Do you have dash lights? Is there fuel in the tank? Have you checked to see if you have fuel pressure? Is the check engine light on? SOOOO many possibilities could be causing it to not start
Open the driver door on the car and locate the fuse panel on the SIDE of the dash. Remove panel and there will be a red reset button. Turn key to the ON position and press and release button. Press and hold button again, and you will hear a series of beeps signaling that it has been reset
I'll try to answer these as asked. 1. check engine light is telling you that you have an emission control problem and needs to be scanned for codes. 2. The abs and traction control light are connected and when the abs sets a problem code it will turn both on , It also needs to be scanned for codes. 3. Having a tire that is a diffrent size or more worn than others will set the tire pressure lamp and it can be cleared by removing the fuse panel door on the side of the dash and holding the red button in with the key on engine off untill it flashes or beeps and goes out.
×