To remove the tail light assembly to be replaced, you need to access the fasteners from inside the trunk.
Remove the black plastic retainers holding the trunk liner in place on the side you wish to replace. Once you have removed the retainers, peel back the trunk liner in the area you will be working on. Disconnect the light bulb sockets (be careful not to break any bulbs). The tail light assembly itself is held in place by 4 - 8mm nuts on the bolts that protrude about 1/2". An 8 mm deep well socket works well, but an open-end wrench will do the same job, just slower. Some of these also hold the wiring in place, so take note of where everthing goes. To put it all back together, just reverse the process.
432 views
Usually answered in minutes!
×